Clipping

SCPI Commands :

[SOURce<HW>]:BB:EUTRa:CLIPping:LEVel
[SOURce<HW>]:BB:EUTRa:CLIPping:MODE
[SOURce<HW>]:BB:EUTRa:CLIPping:STATe

class ClippingCls[source]

Clipping commands group definition. 3 total commands, 0 Subgroups, 3 group commands

get_level() → int[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:CLIPping:LEVel
value: int = driver.source.bb.eutra.clipping.get_level()

Sets the limit for level clipping.

return

level: integer Range: 1 to 100

get_mode() → RsSmw.enums.ClipMode[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:CLIPping:MODE
value: enums.ClipMode = driver.source.bb.eutra.clipping.get_mode()

Sets the method for level clipping.

return

mode: VECTor| SCALar VECTor The reference level is the amplitude | i+jq |. SCALar The reference level is the absolute maximum of the I and Q values.

get_state() → bool[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:CLIPping:STATe
value: bool = driver.source.bb.eutra.clipping.get_state()

Activates level clipping (Clipping) . The value is defined with the command [SOURce:]BB:EUTRa:CLIPping:LEVel, the mode of calculation with the command [SOURce:]BB:EUTRa:CLIPping:MODE.

return

state: ON| OFF

set_level(level: int) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:CLIPping:LEVel
driver.source.bb.eutra.clipping.set_level(level = 1)

Sets the limit for level clipping.

param level

integer Range: 1 to 100

set_mode(mode: RsSmw.enums.ClipMode) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:CLIPping:MODE
driver.source.bb.eutra.clipping.set_mode(mode = enums.ClipMode.SCALar)

Sets the method for level clipping.

param mode

VECTor| SCALar VECTor The reference level is the amplitude | i+jq |. SCALar The reference level is the absolute maximum of the I and Q values.

set_state(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:CLIPping:STATe
driver.source.bb.eutra.clipping.set_state(state = False)

Activates level clipping (Clipping) . The value is defined with the command [SOURce:]BB:EUTRa:CLIPping:LEVel, the mode of calculation with the command [SOURce:]BB:EUTRa:CLIPping:MODE.

param state

ON| OFF