X

SCPI Command :

CALCulate<n>:TRENd:TIMing:X
Commands in total: 1
Subgroups: 0
Direct child commands: 1
set(xaxis: PulseAxisItems, window=Window.Default) → None[source]
# CALCulate<n>:TRENd:TIMing:X
driver.applications.k6Pulse.calculate.trend.timing.x.set(xaxis = enums.PulseAxisItems.DCYCle, window = repcap.Window.Default)

Configures the x-axis of the Parameter Trend result display. The y-axis is configured using the CALCulate<n>:TRENd:<GroupName>:Y commands.

Parameters:

  • xaxis – PNUMber | TSTamp | SETTling | RISE | FALL | PWIDth | OFF | DRATio | DCYCle | PRI | PRF Pulse parameter to be displayed on the x-axis. For a description of the available parameters see ‘Timing parameters’. TSTamp Timestamp PNUMber The pulse numbers are represented on the x-axis (available numbers can be queried using method RsFsw.applications.k6Pulse.sense.pulse.number.get() ) . Intervals without pulses are not displayed. SETTling Settling Time RISE Rise Time FALL Fall Time PWIDth Pulse Width (ON Time) OFF Off Time DRATio Duty Ratio DCYCle Duty Cycle (%) PRI Pulse Repetition Interval PRF Pulse Repetition Frequency (Hz)

  • window – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)