Tsidelobe

SCPI Command :

CALCulate<n>:TRENd:TSIDelobe
class TsidelobeCls[source]

Tsidelobe commands group definition. 3 total commands, 2 Subgroups, 1 group commands

set(yaxis: RsFsw.enums.PulseSidelobeItems, xaxis: RsFsw.enums.PulseAxisItems, window=Window.Default) → None[source]
# SCPI: CALCulate<n>:TRENd:TSIDelobe
driver.applications.k6Pulse.calculate.trend.tsidelobe.set(yaxis = enums.PulseSidelobeItems.AMPower, xaxis = enums.PulseAxisItems.DCYCle, window = repcap.Window.Default)

Configures the Parameter Trend result display for time trends. Is only available if the additional option FSW-K6S is installed. Defines both x-axis and y-axis parameters in one step. It is equivalent to the two subsequent commands: CALCulate<n>:TRENd:TIMing:X TSTamp | PNUMber (see method RsFsw.Applications.K6_Pulse.Calculate.Trend.Timing.X. set) CALCulate<n>:TRENd:TSIDelobe:Y <YAxis> (see method RsFsw.Applications.K6_Pulse.Calculate.Trend.Tsidelobe.Y.set)

param yaxis

PSLevel | ISLevel | MWIDth | SDELay | CRATio | IMPower | AMPower | PCORrelation | MPHase | MFRequency Pulse parameter to be displayed on the y-axis. For a description of the available parameters see ‘Time sidelobe parameters’. PSLevel peak to sidelobe level ISLevel integrated sidelobe level MWIDth mainlobe 3 dB width SDELay sidelobe delay CRATio compression ratio IMPower integrated mainlobe power AMPower average mainlobe power PCORrelation peak correlation MPHase mainlobe phase MFRequency mainlobe frequency

param xaxis

PNUMber | TSTamp | SETTling | RISE | FALL | PWIDth | OFF | DRATio | DCYCle | PRI | PRF Pulse parameter to be displayed on the x-axis. For a description of the available parameters see ‘Timing parameters’. TSTamp Timestamp PNUMber The pulse numbers are represented on the x-axis (available numbers can be queried using [SENSe:]PULSe:NUMBer?) . Intervals without pulses are not displayed. SETTling Settling Time RISE Rise Time FALL Fall Time PWIDth Pulse Width (ON Time) OFF Off Time DRATio Duty Ratio DCYCle Duty Cycle (%) PRI Pulse Repetition Interval PRF Pulse Repetition Frequency (Hz)

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.applications.k6Pulse.calculate.trend.tsidelobe.clone()

Subgroups