Emodel#
SCPI Command :
- CALCulate<n>:TRENd:EMODel
- Commands in total: 3Subgroups: 2Direct child commands: 1
- set ( yaxis: PulseEmodelItems, xaxis: PulseAxisItems, window=Window.Default ) None
# CALCulate<n>:TRENd:EMODel driver.applications.k6Pulse.calculate.trend.emodel.set(yaxis = enums.PulseEmodelItems.FBPTime, xaxis = enums.PulseAxisItems.DCYCle, window = repcap.Window.Default)Configures the Parameter Trend result display for envelope model trends. This command defines both x-axis and y-axis parameters in one step. It is equivalent to the two subsequent commands: CALCulate<n>:TRENd:EMODel:X TSTamp | PNUMber (see method
RsFsw.applications.k6Pulse.calculate.trend.emodel.x.set()) CALCulate<n>:TRENd:EMODel:Y <YAxis> (see methodRsFsw.applications.k6Pulse.calculate.trend.emodel.y.set())- Parameters:
yaxis – RBPTime | RLPTime | RMPTime | RHPTime | RTPTime | RLPLevel | RMPLevel | RHPLevel | RTPLevel | FBPTime | FLPTime | FMPTime | FHPTime | FTPTime | FLPLevel | FMPLevel | FHPLevel | FTPLevel
RBPTime: Rise Base Point Time
RLPTime: Rise Low Point Time
RMPTime: Rise Mid Point Time
RHPTime: Rise High Point Time
RTPTime: Rise Top Point Time
RLPLevel: Rise Low Point Level
RMPLevel: Rise Mid Point Level
RHPLevel: Rise High Point Level
RTPLevel: Rise Top Point Level
FBPTime: Fall Base Point Time
FLPTime: Fall Low Point Time
FMPTime: Fall Mid Point Time
FHPTime: Fall High Point Time
FTPTime: Fall Top Point Time
FLPLevel: Fall Low Point Level
FMPLevel: Fall Mid Point Level
FHPLevel: Fall High Point Level
FTPLevel: Fall Top Point Level
xaxis – Pulse parameter to be displayed on the x-axis. For a description of the available parameters see ‘Timing parameters’.
TSTamp: Timestamp
PNUMber: The pulse numbers are represented on the x-axis (available numbers can be queried using [SENSe:]PULSe:NUMBer?) . Intervals without pulses are not displayed.
SETTling: Settling Time
RISE: Rise Time
FALL: Fall Time
PWIDth: Pulse Width (ON Time)
OFF: Off Time
DRATio: Duty Ratio
DCYCle: Duty Cycle (%)
PRI: Pulse Repetition Interval
PRF: Pulse Repetition Frequency (Hz)
window – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)
Cloning the Group
# Create a copy of the original group, that exists independently
emodel_copy = driver.applications.k6Pulse.calculate.trend.emodel.clone()
Subgroups