TriggerInvoke

SCPI Command :

*TRG

Commands in total: 1

Subgroups: 0

Direct child commands: 1

set() → None

# *TRG
driver.triggerInvoke.set()

Trigger Triggers all actions waiting for a trigger event. In particular, *TRG generates a manual trigger signal. This common command complements the commands of the TRIGger subsystem. *TRG corresponds to the INITiate:IMMediate command. See method RsFsw.applications.k10Xlte.initiate.immediate.perform() .

set_with_opc(opc_timeout_ms: int = -1) → None

# *TRG
driver.triggerInvoke.set_with_opc()

Trigger Triggers all actions waiting for a trigger event. In particular, *TRG generates a manual trigger signal. This common command complements the commands of the TRIGger subsystem. *TRG corresponds to the INITiate:IMMediate command. See method RsFsw.applications.k10Xlte.initiate.immediate.perform() .

Same as set, but waits for the operation to complete before continuing further. Use the RsFsw.utilities.opc_timeout_set() to set the timeout value.

Parameters:

opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.