Timing

SCPI Command :

CALCulate<n>:TRENd:TIMing
Commands in total: 3
Subgroups: 2
Direct child commands: 1
set(yaxis: PulseTimingItems, xaxis: PulseAxisItems, window=Window.Default) → None[source]
# CALCulate<n>:TRENd:TIMing
driver.applications.k6Pulse.calculate.trend.timing.set(yaxis = enums.PulseTimingItems.DCYCle, xaxis = enums.PulseAxisItems.DCYCle, window = repcap.Window.Default)

Configures the Parameter Trend result display for time trends. This command defines both x-axis and y-axis parameters in one step. It is equivalent to the two subsequent commands: CALCulate<n>:TRENd:TIMing:X TSTamp | PNUMber (see method RsFsw.applications.k6Pulse.calculate.trend.timing.x.set() ) CALCulate<n>:TRENd:TIMing:Y <YAxis> (see method RsFsw.applications.k6Pulse.calculate.trend.timing.y.set() )

Parameters:

  • yaxis – TSTamp | SETTling | RISE | FALL | PWIDth | OFF | DRATio | DCYCle | PRI | PRF Pulse parameter to be displayed on the y-axis. For a description of the available parameters see ‘Timing parameters’. TSTamp Timestamp SETTling Settling Time RISE Rise Time FALL Fall Time PWIDth Pulse Width (ON Time) OFF Off Time DRATio Duty Ratio DCYCle Duty Cycle (%) PRI Pulse Repetition Interval PRF Pulse Repetition Frequency (Hz)

  • xaxis – PNUMber | TSTamp | SETTling | RISE | FALL | PWIDth | OFF | DRATio | DCYCle | PRI | PRF Pulse parameter to be displayed on the x-axis. For a description of the available parameters see ‘Timing parameters’. TSTamp Timestamp PNUMber The pulse numbers are represented on the x-axis (available numbers can be queried using method RsFsw.applications.k6Pulse.sense.pulse.number.get() ) . Intervals without pulses are not displayed. SETTling Settling Time RISE Rise Time FALL Fall Time PWIDth Pulse Width (ON Time) OFF Off Time DRATio Duty Ratio DCYCle Duty Cycle (%) PRI Pulse Repetition Interval PRF Pulse Repetition Frequency (Hz)

  • window – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

Cloning the Group

# Create a copy of the original group, that exists independently
timing_copy = driver.applications.k6Pulse.calculate.trend.timing.clone()

Subgroups