Y

SCPI Command :

CALCulate<n>:TRENd:POWer:Y

class YCls

Y commands group definition. 1 total commands, 0 Subgroups, 1 group commands

set(yaxis: RsFsw.enums.PulsePowerItems, window=Window.Default) → None

# SCPI: CALCulate<n>:TRENd:POWer:Y
driver.applications.k6Pulse.calculate.trend.power.y.set(yaxis = enums.PulsePowerItems.ADDB, window = repcap.Window.Default)

Configures the y-axis of the Parameter Trend result display. The x-axis is configured using the CALCulate<n>:TRENd:<GroupName>:X commands.

param yaxis

TOP | BASE | AMPLitude | ON | AVG | MIN | MAX | PON | PAVG | PMIN | ADPercent | ADDB | RPERcent | RDB | OPERcent | ODB | POINt | PPRatio | I | Q Pulse parameter to be displayed on the y-axis. For a description of the available parameters see ‘Power/amplitude parameters’. TOP Top Power BASE Base Power AMPLitude Pulse Amplitude ON Average ON Power AVG Average Tx Power MIN Minimum Power MAX Peak Power PON Peak-to-Avg ON Power Ratio PAVG Peak-to-Average Tx Power Ratio PMIN Peak-to-Min Power Ratio ADPercent Droop in % ADDB Droop in dB RPERcent Ripple in % RDB Ripple in dB OPERcent Overshoot in % ODB Overshoot in dB POINt Pulse power measured at measurement point PPRatio Pulse-to-Pulse Power Difference

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)