Source:Bb:W3Gpp:Mstation:Enhanced:Dpdch:DpControl#
SCPI Commands
- [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:AOUE
- [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:ASSignment
- [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:CONNector
- [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:DIRection
- [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:MODE
- [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:STATe
- [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:[POWer]
Cloning the Group
// Create a clone of the original group, that exists independently
var dpControl2 = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.DpControl.Clone();
Direct SCPI Members
- bool Aoue#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:AOUE bool value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.DpControl.Aoue; driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.DpControl.Aoue = false;Enables power control of the enhanced channels of all active UEs with the settings of UE1.
state: 1 | ON | 0| OFF
- PowContAssModeEnum Assignment#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:ASSignment PowContAssModeEnum value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.DpControl.Assignment; driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.DpControl.Assignment = PowContAssModeEnum.FDPCh;Enabled for UL-DTX mode only (method RsSmw.Source.Bb.W3Gpp.Mstation.Udtx.State ON) . The power control recognizes the UL-DPCCH gaps according to 3GPP TS 25.214. Some of the TPC commands sent to the instrument over the external line or by the TPC pattern are ignored, whereas others are summed up and applied later. The processing of the TPC commands depends only on whether the BS sends the TPC bits on the F-DPCH with slot format 0/ slot format 9 or not.
assignment: NORMal | FDPCh
- FeedbackConnectorEnum Connector#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:CONNector FeedbackConnectorEnum value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.DpControl.Connector; driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.DpControl.Connector = FeedbackConnectorEnum.GLOBal;Determines the input connector at that the instrument expects the external control signal.
connector: LOCal | GLOBal
- UpDownDirectionEnum Direction#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:DIRection UpDownDirectionEnum value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.DpControl.Direction; driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.DpControl.Direction = UpDownDirectionEnum.DOWN;The command selects the Dynamic Power Control direction. The selected direction determines if the channel power is increased (UP) or decreased (DOWN) by control signal with high level.
direction: UP | DOWN
- PowContModeEnum Mode#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:MODE PowContModeEnum value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.DpControl.Mode; driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.DpControl.Mode = PowContModeEnum.EXTernal;Determines the source of the control signal.
mode: TPC | MANual | EXTernal
- bool State#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:STATe bool value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.DpControl.State; driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.DpControl.State = false;Activates/deactivates Dynamic Power Control.
state: 1 | ON | 0| OFF
- double Power#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:[POWer] double value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.DpControl.Power;The command queries the deviation of the channel power (delta POW) from the set power start value of the DPDCH.
power: float
Subgroups