Source:Bb:W3Gpp#
SCPI Commands
- [SOURce<HW>]:BB:W3GPp:LINK
- [SOURce<HW>]:BB:W3GPp:LREFerence
- [SOURce<HW>]:BB:W3GPp:PRESet
- [SOURce<HW>]:BB:W3GPp:SLENgth
- [SOURce<HW>]:BB:W3GPp:STATe
Cloning the Group
// Create a clone of the original group, that exists independently
var w3Gpp2 = driver.Source.Bb.W3Gpp.Clone();
Direct SCPI Members
- LinkDirEnum Link#
// SCPI: [SOURce<HW>]:BB:W3GPp:LINK LinkDirEnum value = driver.Source.Bb.W3Gpp.Link; driver.Source.Bb.W3Gpp.Link = LinkDirEnum.DOWN;The command defines the transmission direction. The signal either corresponds to that of a base station (FORWard | DOWN) or that of a user equipment (REVerse | UP) .
link: DOWN | UP | FORWard | REVerse
- WcdmaLevRefEnum Lreference#
// SCPI: [SOURce<HW>]:BB:W3GPp:LREFerence WcdmaLevRefEnum value = driver.Source.Bb.W3Gpp.Lreference; driver.Source.Bb.W3Gpp.Lreference = WcdmaLevRefEnum.DPCC;Determines the power reference for the calculation of the output signal power in uplink direction.
reference: RMS | DPCC | PMP | LPP | EDCH | HACK | PCQI
RMS: RMS Power
DPCC: First DPCCH
PMP: PRACH Message Part
LPP: Last PRACH Preamble
EDCH: Requires R&S SMW-K83.First E-DCH
HACK: Requires R&S SMW-K83.First HARQ-ACK
PCQI: Requires R&S SMW-K83.First PCI/CQI
- void Preset ( )#
- void PresetAndWait ( )#
- void PresetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:BB:W3GPp:PRESet driver.Source.Bb.W3Gpp.Preset(); driver.Source.Bb.W3Gpp.PresetAndWait(); driver.Source.Bb.W3Gpp.PresetAndWait(1000);Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:BB:W3GPp:STATe.
PresetAndWait is the same as Preset, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value
RsSmw.Utilities.OpcTimeout.
- int Slength#
// SCPI: [SOURce<HW>]:BB:W3GPp:SLENgth int value = driver.Source.Bb.W3Gpp.Slength; driver.Source.Bb.W3Gpp.Slength = 1;Defines the sequence length of the arbitrary waveform component of the 3GPP signal in the number of frames. This component is calculated in advance and output in the arbitrary waveform generator. It is added to the realtime signal components (Enhanced Channels) . When working in Advanced Mode (W3GP:BST1:CHAN:HSDP:HSET:AMOD ON) , it is recommended to adjust the current ARB sequence length to the suggested one.
slength: integer
- bool State#
// SCPI: [SOURce<HW>]:BB:W3GPp:STATe bool value = driver.Source.Bb.W3Gpp.State; driver.Source.Bb.W3Gpp.State = false;Activates the standard and deactivates all the other digital standards and digital modulation modes in the same path.
state: 1 | ON | 0| OFF
Subgroups
- Source:Bb:W3Gpp:Bstation<BaseStationRepCap>
- Source:Bb:W3Gpp:Clipping
- Source:Bb:W3Gpp:Clock
- Source:Bb:W3Gpp:Copy
- Source:Bb:W3Gpp:Crate
- Source:Bb:W3Gpp:Filter
- Source:Bb:W3Gpp:Gpp3
- Source:Bb:W3Gpp:Mstation<MobileStationRepCap>
- Source:Bb:W3Gpp:Power
- Source:Bb:W3Gpp:Pparameter
- Source:Bb:W3Gpp:Setting
- Source:Bb:W3Gpp:Trigger
- Source:Bb:W3Gpp:Ts25141
- Source:Bb:W3Gpp:Waveform