Source:Bb:W3Gpp:Mstation:Udtx#
SCPI Commands
- [SOURce<HW>]:BB:W3GPp:MSTation:UDTX:ITHReshold
- [SOURce<HW>]:BB:W3GPp:MSTation:UDTX:LPLength
- [SOURce<HW>]:BB:W3GPp:MSTation:UDTX:MODE
- [SOURce<HW>]:BB:W3GPp:MSTation:UDTX:OFFSet
- [SOURce<HW>]:BB:W3GPp:MSTation:UDTX:STATe
- [SOURce<HW>]:BB:W3GPp:MSTation:UDTX:TTIEdch
Cloning the Group
// Create a clone of the original group, that exists independently
var udtx2 = driver.Source.Bb.W3Gpp.Mstation.Udtx.Clone();
Direct SCPI Members
- WcdmaUlDtxThresholdEnum Ithreshold#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:UDTX:ITHReshold WcdmaUlDtxThresholdEnum value = driver.Source.Bb.W3Gpp.Mstation.Udtx.Ithreshold; driver.Source.Bb.W3Gpp.Mstation.Udtx.Ithreshold = WcdmaUlDtxThresholdEnum._1;Defines the number of consecutive E-DCH TTIs without an E-DCH transmission, after which the UE shall immediately move from UE-DTX cycle 1 to using UE-DTX cycle 2.
threshold: 1 | 4| 8 | 16 | 32 | 64 | 128 | 256
- WcdmaUlDtxLongPreLenEnum LpLength#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:UDTX:LPLength WcdmaUlDtxLongPreLenEnum value = driver.Source.Bb.W3Gpp.Mstation.Udtx.LpLength; driver.Source.Bb.W3Gpp.Mstation.Udtx.LpLength = WcdmaUlDtxLongPreLenEnum._15;Determines the length in slots of the preamble associated with the UE-DTX cycle 2.
longPreamble: 2 | 4| 15
- WcdmaUlDtxModeEnum Mode#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:UDTX:MODE WcdmaUlDtxModeEnum value = driver.Source.Bb.W3Gpp.Mstation.Udtx.Mode; driver.Source.Bb.W3Gpp.Mstation.Udtx.Mode = WcdmaUlDtxModeEnum.UDTX;Switches between the UL-DTX or user scheduling function.
uldTxMode: UDTX | USCH
- int Offset#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:UDTX:OFFSet int value = driver.Source.Bb.W3Gpp.Mstation.Udtx.Offset; driver.Source.Bb.W3Gpp.Mstation.Udtx.Offset = 1;Sets the parameter UE_DTX_DRX_Offset and determines the start offset in subframes of the first uplink DPCCH burst (after the preamble) . The offset is applied only for bursts belonging to the DPCCH burst pattern; HS-DPCCH or E-DCH transmissions are not affected.
offset: integer
- bool State#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:UDTX:STATe bool value = driver.Source.Bb.W3Gpp.Mstation.Udtx.State; driver.Source.Bb.W3Gpp.Mstation.Udtx.State = false;Enables/disables UL-DTX or user scheduling, as selected with the command method RsSmw.Source.Bb.W3Gpp.Mstation.Udtx.Mode. Enabling the UL-DTX deactivates the DPDCH and the HSUPA FRC. Enabled user scheduling deactivates the HSUPA FRC.
state: 1 | ON | 0| OFF
- HsUpaDchTtiEnum Ttiedch#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:UDTX:TTIEdch HsUpaDchTtiEnum value = driver.Source.Bb.W3Gpp.Mstation.Udtx.Ttiedch; driver.Source.Bb.W3Gpp.Mstation.Udtx.Ttiedch = HsUpaDchTtiEnum._10ms;Sets the duration of a E-DCH TTI.
edchTti: 2ms | 10ms
Subgroups