Source:Bb:W3Gpp:Mstation:Enhanced:Dpdch#

SCPI Commands

[SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:BPFRame
[SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:INTerleaver2
[SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:ORATe
[SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:STATe

Cloning the Group

// Create a clone of the original group, that exists independently
var dpdch2 = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Clone();

Direct SCPI Members

int BpFrame#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:BPFRame
int value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.BpFrame;

The command queries the number of data bits in the DPDCH component of the frame at the physical layer. The number of data bits depends on the overall symbol rate.

bpFrame: integer


bool Interleaver2#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:INTerleaver2
bool value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Interleaver2;
driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Interleaver2 = false;

The command activates or deactivates channel coding interleaver state 2 for all the transport channels. Interleaver state 1 can be activated and deactivated for each channel individually (method RsSmw.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Tchannel.Interleaver.Set) . Note: The interleaver states do not cause the symbol rate to change

interleaver2: 1 | ON | 0| OFF


SymbRateEnum Orate#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:ORATe
SymbRateEnum value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Orate;
driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Orate = SymbRateEnum.D120k;

The command queries the overall symbol rate (Overall Symbol Rate) of the enhanced channels. The value is set with the command method RsSmw.Source.Bb.W3Gpp.Mstation.Dpdch.Orate.Set. This setting also defines the number of active channels, their symbol rates and channelization codes.

orate: D15K | D30K | D60K | D120k | D240k | D480k | D960k | D1920k | D2880k | D3840k | D4800k | D5760k


bool State#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:STATe
bool value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.State;
driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.State = false;

Queries the enhanced state of the station.

state: 1 | ON | 0| OFF


Subgroups