Source:Bb:W3Gpp:Mstation:Enhanced:Dpdch:Ccoding#
SCPI Commands
- [SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:CCODing:STATe
- [SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:CCODing:TYPE
Cloning the Group
// Create a clone of the original group, that exists independently
var ccoding2 = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Ccoding.Clone();
Direct SCPI Members
- bool State#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:CCODing:STATe bool value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Ccoding.State; driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Ccoding.State = false;The command activates or deactivates channel coding for the enhanced channels. When channel coding is activated, the overall symbol rate (method RsSmw.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Orate) is set to the value predetermined by the selected channel coding type (method RsSmw.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Ccoding.Type) .
state: 1 | ON | 0| OFF
- ChanCodTypeEnum Type#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:CCODing:TYPE ChanCodTypeEnum value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Ccoding.Type; driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Ccoding.Type = ChanCodTypeEnum.AMR;The command selects the channel coding scheme in accordance with the 3GPP specification. The channel coding scheme selected predetermines the overall symbol rate. When channel coding is activated (method RsSmw.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Ccoding.State) the overall symbol rate (method RsSmw.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Orate) is set to the value predetermined by the selected channel coding type.
type: M12K2 | M64K | M144k | M384k | AMR
M12K2: Measurement channel with an input data bit rate of 12.2 ksps.
M64K: Measurement channel with an input data bit rate of 64 ksps.
M144K: Measurement channel with an input data bit rate of 144 ksps.
M384K: Measurement channel with an input data bit rate of 384 ksps.
AMR: Channel coding for the AMR Coder (coding a voice channel) .
USER: This parameter cannot be set. USER is returned whenever a user-defined channel coding is active, that is to say, after a channel coding parameter has been changed or a user coding file has been loaded. The file is loaded by the command [:SOURcehw]:BB:W3GPp:MSTation:ENHanced:DPDCh:CCODing:USER:LOAD.
Subgroups