Source:Bb:W3Gpp:Ts25141#

SCPI Commands

[SOURce]:BB:W3GPp:TS25141:BSPClass
[SOURce]:BB:W3GPp:TS25141:EMODe
[SOURce]:BB:W3GPp:TS25141:ROUTe
[SOURce]:BB:W3GPp:TS25141:RXDiversity

Cloning the Group

// Create a clone of the original group, that exists independently
var ts251412 = driver.Source.Bb.W3Gpp.Ts25141.Clone();

Direct SCPI Members

Ts25141BspOwClassEnum BspClass#
// SCPI: [SOURce]:BB:W3GPp:TS25141:BSPClass
Ts25141BspOwClassEnum value = driver.Source.Bb.W3Gpp.Ts25141.BspClass;
driver.Source.Bb.W3Gpp.Ts25141.BspClass = Ts25141BspOwClassEnum.LOCal;

Selects the base station power class.

bspClass: WIDE | MEDium | LOCal


Ts25141EditModeEnum Emode#
// SCPI: [SOURce]:BB:W3GPp:TS25141:EMODe
Ts25141EditModeEnum value = driver.Source.Bb.W3Gpp.Ts25141.Emode;
driver.Source.Bb.W3Gpp.Ts25141.Emode = Ts25141EditModeEnum.STANdard;

Selects the edit mode for the configuration of the test cases.

emode: STANdard | USER

  • STANdard: Edit mode According to Standard. Only settings in compliance with TS 25.141 are possible. All other parameters are preset.

  • USER: Edit mode User definable. A wider range of settings is possible


MappingTypeEnum Route#
// SCPI: [SOURce]:BB:W3GPp:TS25141:ROUTe
MappingTypeEnum value = driver.Source.Bb.W3Gpp.Ts25141.Route;
driver.Source.Bb.W3Gpp.Ts25141.Route = MappingTypeEnum.A;

Selects the signal routing for baseband A signal which in most test cases represents the wanted signal (exception test case 6.6) . The command is only available for two-path-instruments and only for test cases that do not use both paths anyway.

route: A | B


bool RxDiversity#
// SCPI: [SOURce]:BB:W3GPp:TS25141:RXDiversity
bool value = driver.Source.Bb.W3Gpp.Ts25141.RxDiversity;
driver.Source.Bb.W3Gpp.Ts25141.RxDiversity = false;

Sets the signal generator according to the base station diversity processing capability. The command is only available for two-path-instruments and only for test cases that do not use both paths anyway.

rxDiversity: 1 | ON | 0| OFF


Subgroups