Source:Bb:W3Gpp:Pparameter#
SCPI Commands
- [SOURce<HW>]:BB:W3GPp:PPARameter:CRESt
- [SOURce<HW>]:BB:W3GPp:PPARameter:SCHannels
Cloning the Group
// Create a clone of the original group, that exists independently
var pparameter2 = driver.Source.Bb.W3Gpp.Pparameter.Clone();
Direct SCPI Members
- CresFactModeEnum Crest#
// SCPI: [SOURce<HW>]:BB:W3GPp:PPARameter:CRESt CresFactModeEnum value = driver.Source.Bb.W3Gpp.Pparameter.Crest; driver.Source.Bb.W3Gpp.Pparameter.Crest = CresFactModeEnum.AVERage;This command selects the desired range for the crest factor of the test scenario. The crest factor of the signal is kept in the desired range by automatically setting appropriate channelization codes and timing offsets. The setting takes effect only after execution of command BB:W3GPp:PPARameter:EXECute. The settings of commands
BB:W3GP:BST<n>:CHAN<n>:CCODe and
BB:W3GP:BST<n>:CHAN<n>:TOFFset
Are adjusted according to the selection.
crest: MINimum | AVERage | WORSt
MINimum: The crest factor is minimized. The channelization codes are distributed uniformly over the code domain. The timing offsets are increased by 3 per channel.
AVERage: An average crest factor is set. The channelization codes are distributed uniformly over the code domain. The timing offsets are all set to 0.
WORSt: The crest factor is set to an unfavorable value (i.e. maximum) . The channelization codes are assigned in ascending order. The timing offsets are all set to 0.
- bool Schannels#
// SCPI: [SOURce<HW>]:BB:W3GPp:PPARameter:SCHannels bool value = driver.Source.Bb.W3Gpp.Pparameter.Schannels; driver.Source.Bb.W3Gpp.Pparameter.Schannels = false;The command activates/deactivates the PCPICH, PSCH, SSCH and PCCPCH. These “special channels” are required by a user equipment for synchronization. The setting takes effect only after execution of command BB:W3GPp:PPARameter:EXECute.
schannels: 1 | ON | 0| OFF
Subgroups