Source:Bb:W3Gpp:Clipping#

SCPI Commands

[SOURce<HW>]:BB:W3GPp:CLIPping:LEVel
[SOURce<HW>]:BB:W3GPp:CLIPping:MODE
[SOURce<HW>]:BB:W3GPp:CLIPping:STATe

Direct SCPI Members

int Level#
// SCPI: [SOURce<HW>]:BB:W3GPp:CLIPping:LEVel
int value = driver.Source.Bb.W3Gpp.Clipping.Level;
driver.Source.Bb.W3Gpp.Clipping.Level = 1;

The command sets the limit for level clipping (Clipping) . This value indicates at what point the signal is clipped. It is specified as a percentage, relative to the highest level. 100% indicates that clipping does not take place. Level clipping is activated with the command SOUR:BB:W3GP:CLIP:STAT ON

level: integer


ClipModeEnum Mode#
// SCPI: [SOURce<HW>]:BB:W3GPp:CLIPping:MODE
ClipModeEnum value = driver.Source.Bb.W3Gpp.Clipping.Mode;
driver.Source.Bb.W3Gpp.Clipping.Mode = ClipModeEnum.SCALar;

The command sets the method for level clipping (Clipping) .

mode: VECTor | SCALar

  • VECTor: The reference level is the amplitude i+jq

  • SCALar: The reference level is the absolute maximum of the I and Q values.


bool State#
// SCPI: [SOURce<HW>]:BB:W3GPp:CLIPping:STATe
bool value = driver.Source.Bb.W3Gpp.Clipping.State;
driver.Source.Bb.W3Gpp.Clipping.State = false;

Activates level clipping.

state: 1 | ON | 0| OFF