Source:Bb:Pramp:Ramp:Stair:Step#

SCPI Commands

[SOURce<HW>]:BB:PRAMp:RAMP:STAir:STEP:LEVel
[SOURce<HW>]:BB:PRAMp:RAMP:STAir:STEP:[STATe]

Direct SCPI Members

double Level#
// SCPI: [SOURce<HW>]:BB:PRAMp:RAMP:STAir:STEP:LEVel
double value = driver.Source.Bb.Pramp.Ramp.Stair.Step.Level;
driver.Source.Bb.Pramp.Ramp.Stair.Step.Level = 1.0;

Sets the power step size.

step: float


bool State#
// SCPI: [SOURce<HW>]:BB:PRAMp:RAMP:STAir:STEP:[STATe]
bool value = driver.Source.Bb.Pramp.Ramp.Stair.Step.State;
driver.Source.Bb.Pramp.Ramp.Stair.Step.State = false;

Activates the edit mode to set the power step. To determine the power step size, use command method RsSmw.Source.Bb.Pramp.Ramp.Stair.Step.Level.

enablePowerStep: 1 | ON | 0| OFF