Source:Bb:Pramp:Ramp:Stair:Dwell#

SCPI Commands

[SOURce<HW>]:BB:PRAMp:RAMP:STAir:DWELl:TIME
[SOURce<HW>]:BB:PRAMp:RAMP:STAir:DWELl:[STATe]

Direct SCPI Members

double Time#
// SCPI: [SOURce<HW>]:BB:PRAMp:RAMP:STAir:DWELl:TIME
double value = driver.Source.Bb.Pramp.Ramp.Stair.Dwell.Time;
driver.Source.Bb.Pramp.Ramp.Stair.Dwell.Time = 1.0;

Sets the dwell time for a power step. To activate the dwell time, use command .method RsSmw.Source.Bb.Pramp.Ramp.Stair.Dwell.State.

dwellTime: float


bool State#
// SCPI: [SOURce<HW>]:BB:PRAMp:RAMP:STAir:DWELl:[STATe]
bool value = driver.Source.Bb.Pramp.Ramp.Stair.Dwell.State;
driver.Source.Bb.Pramp.Ramp.Stair.Dwell.State = false;

Activates the edit mode to set the dwell time. To determine the dwell time, use command method RsSmw.Source.Bb.Pramp.Ramp.Stair.Dwell.Time.

enableDwell: 1 | ON | 0| OFF