Source:Bb:Pramp:Ramp#

SCPI Commands

[SOURce<HW>]:BB:PRAMp:RAMP:ATTenuation
[SOURce<HW>]:BB:PRAMp:RAMP:CONStmode
[SOURce<HW>]:BB:PRAMp:RAMP:LEVel
[SOURce<HW>]:BB:PRAMp:RAMP:RANGe
[SOURce<HW>]:BB:PRAMp:RAMP:RESolution
[SOURce<HW>]:BB:PRAMp:RAMP:SAMPlerate
[SOURce<HW>]:BB:PRAMp:RAMP:SHAPe
[SOURce<HW>]:BB:PRAMp:RAMP:SLOPe
[SOURce<HW>]:BB:PRAMp:RAMP:STARtlevel
[SOURce<HW>]:BB:PRAMp:RAMP:STOPlevel

Cloning the Group

// Create a clone of the original group, that exists independently
var ramp2 = driver.Source.Bb.Pramp.Ramp.Clone();

Direct SCPI Members

double Attenuation#
// SCPI: [SOURce<HW>]:BB:PRAMp:RAMP:ATTenuation
double value = driver.Source.Bb.Pramp.Ramp.Attenuation;
driver.Source.Bb.Pramp.Ramp.Attenuation = 1.0;

Sets the attenuation in constant power sweep mode.

constAtten: float


bool Constmode#
// SCPI: [SOURce<HW>]:BB:PRAMp:RAMP:CONStmode
bool value = driver.Source.Bb.Pramp.Ramp.Constmode;
driver.Source.Bb.Pramp.Ramp.Constmode = false;

Enables power constant mode.

constmode: 1 | ON | 0| OFF


double Level#
// SCPI: [SOURce<HW>]:BB:PRAMp:RAMP:LEVel
double value = driver.Source.Bb.Pramp.Ramp.Level;

Queries the resulting constant power value of the power sweep.

constLevel: float


double Range#
// SCPI: [SOURce<HW>]:BB:PRAMp:RAMP:RANGe
double value = driver.Source.Bb.Pramp.Ramp.Range;
driver.Source.Bb.Pramp.Ramp.Range = 1.0;

Sets the power sweep range.

range: float


double Resolution#
// SCPI: [SOURce<HW>]:BB:PRAMp:RAMP:RESolution
double value = driver.Source.Bb.Pramp.Ramp.Resolution;

Queries the resolution of the power steps.

powerResolution: float


double SampleRate#
// SCPI: [SOURce<HW>]:BB:PRAMp:RAMP:SAMPlerate
double value = driver.Source.Bb.Pramp.Ramp.SampleRate;

Queries the calculated sample rate.

sampleRate: float


PowerRampShapeEnum Shape#
// SCPI: [SOURce<HW>]:BB:PRAMp:RAMP:SHAPe
PowerRampShapeEnum value = driver.Source.Bb.Pramp.Ramp.Shape;
driver.Source.Bb.Pramp.Ramp.Shape = PowerRampShapeEnum.LINear;

Selects the power sweep shape.

shape: LINear | STAir | TRIangle

  • LINear: The sweep curve resembles a sawtooth.

  • STAir: The sweep curve resembles a stair step with definable Dwell time or Power step, see [:SOURcehw]:BB:PRAMp:RAMP:STAir:DWELl:TIME and [:SOURcehw]:BB:PRAMp:RAMP:STAir:STEP:LEVel.

  • TRIangle: The sweep curve resembles a triangle.


PowerRampSlopeEnum Slope#
// SCPI: [SOURce<HW>]:BB:PRAMp:RAMP:SLOPe
PowerRampSlopeEnum value = driver.Source.Bb.Pramp.Ramp.Slope;
driver.Source.Bb.Pramp.Ramp.Slope = PowerRampSlopeEnum.ASCending;

Sets the slope direction (increasing or decreasing) .

slope: ASCending | DESCending


double StartLevel#
// SCPI: [SOURce<HW>]:BB:PRAMp:RAMP:STARtlevel
double value = driver.Source.Bb.Pramp.Ramp.StartLevel;

Queries the start or end power values of the active measurement.

startLevel: float


double StopLevel#
// SCPI: [SOURce<HW>]:BB:PRAMp:RAMP:STOPlevel
double value = driver.Source.Bb.Pramp.Ramp.StopLevel;

Queries the start or end power values of the active measurement.

stopLevel: float


Subgroups