Source:Bb:Eutra:Tcw:Is#

SCPI Commands

[SOURce<HW>]:BB:EUTRa:TCW:IS:CHBW
[SOURce<HW>]:BB:EUTRa:TCW:IS:CLID
[SOURce<HW>]:BB:EUTRa:TCW:IS:DUPLex
[SOURce<HW>]:BB:EUTRa:TCW:IS:FRSHift
[SOURce<HW>]:BB:EUTRa:TCW:IS:IFTYpe
[SOURce<HW>]:BB:EUTRa:TCW:IS:NRBLock
[SOURce<HW>]:BB:EUTRa:TCW:IS:NTAOffset
[SOURce<HW>]:BB:EUTRa:TCW:IS:OCEDge
[SOURce<HW>]:BB:EUTRa:TCW:IS:ORTCover
[SOURce<HW>]:BB:EUTRa:TCW:IS:OVRB
[SOURce<HW>]:BB:EUTRa:TCW:IS:PLEVel
[SOURce<HW>]:BB:EUTRa:TCW:IS:PRCOndition
[SOURce<HW>]:BB:EUTRa:TCW:IS:RBCFrequency
[SOURce<HW>]:BB:EUTRa:TCW:IS:RFFRequency
[SOURce<HW>]:BB:EUTRa:TCW:IS:TDDConfig
[SOURce<HW>]:BB:EUTRa:TCW:IS:TMCodes
[SOURce<HW>]:BB:EUTRa:TCW:IS:TMODel
[SOURce<HW>]:BB:EUTRa:TCW:IS:TREQuire
[SOURce<HW>]:BB:EUTRa:TCW:IS:UEID

Direct SCPI Members

EutraTcwcHanBwEnum Chbw#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:CHBW
EutraTcwcHanBwEnum value = driver.Source.Bb.Eutra.Tcw.Is.Chbw;

Queries the channel bandwidth of the interfering signal in MHz: 20, 10, 5, 3, 1.4, 15, or 0.2 MHz.

chanBandwidth: BW20_00 | BW10_00 | BW5_00 | BW3_00 | BW1_40 | BW15_00 | BW00_20


int Clid#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:CLID
int value = driver.Source.Bb.Eutra.Tcw.Is.Clid;
driver.Source.Bb.Eutra.Tcw.Is.Clid = 1;

Sets the Cell ID for the interfering signal.

cellId: integer


EutraDuplexModeEnum Duplex#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:DUPLex
EutraDuplexModeEnum value = driver.Source.Bb.Eutra.Tcw.Is.Duplex;
driver.Source.Bb.Eutra.Tcw.Is.Duplex = EutraDuplexModeEnum.FDD;

Selects whether TDD or FDD duplexing mode is used.

duplex: TDD | FDD


EutraTcwfReqShiftEnum FrShift#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:FRSHift
EutraTcwfReqShiftEnum value = driver.Source.Bb.Eutra.Tcw.Is.FrShift;
driver.Source.Bb.Eutra.Tcw.Is.FrShift = EutraTcwfReqShiftEnum.FS0;

Sets the value of the parameter Frequency Shift m.

frequencyShift: FS24 | FS19 | FS14 | FS13 | FS10 | FS9 | FS7 | FS5 | FS4 | FS3 | FS2 | FS1 | FS0


EutraTcwInterfTypeEnum IfType#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:IFTYpe
EutraTcwInterfTypeEnum value = driver.Source.Bb.Eutra.Tcw.Is.IfType;
driver.Source.Bb.Eutra.Tcw.Is.IfType = EutraTcwInterfTypeEnum.CW;

Selects the type of the interfering signal:

  • For Blocking tests, the interfering signal can be an in-band EUTRA/LTE signal (EUTra) or out-of-band CW signal (CW) .

  • For Receiver Intermodulation tests, the first interfering signal can be an EUTRA/LTE signal (EUTra) or narrowband EUTRA signal (NEUTra) . The second interfering signal is always a CW signal (CW) .

interfererType: NEUTra | EUTra | CW | UTRA


int Nrblock#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:NRBLock
int value = driver.Source.Bb.Eutra.Tcw.Is.Nrblock;

Queries the number of RBs used by the LTE interfering signal.

numResBlock: integer


EutraTcwsIgAdvNtaOffsEnum NtaOffset#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:NTAOffset
EutraTcwsIgAdvNtaOffsEnum value = driver.Source.Bb.Eutra.Tcw.Is.NtaOffset;
driver.Source.Bb.Eutra.Tcw.Is.NtaOffset = EutraTcwsIgAdvNtaOffsEnum.NTA0;

Sets the parameter NTAoffset.

sigAdvNtaOffset: NTA624 | NTA0


EutraTcwoFfsChanEdgeEnum OcEdge#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:OCEDge
EutraTcwoFfsChanEdgeEnum value = driver.Source.Bb.Eutra.Tcw.Is.OcEdge;
driver.Source.Bb.Eutra.Tcw.Is.OcEdge = EutraTcwoFfsChanEdgeEnum.OCE12_5;

Defines the offset of the interfering signal center frequency relative to edge of the wanted channel bandwidth.

offsetChannelEdge: OCE12_5 | OCE7_5 | OCE2_5


int OrtCover#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:ORTCover
int value = driver.Source.Bb.Eutra.Tcw.Is.OrtCover;

Queries the used resource index n_PUCCH.

orthoCover: integer


int Ovrb#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:OVRB
int value = driver.Source.Bb.Eutra.Tcw.Is.Ovrb;

Queries the offset VRB.

offsetVrb: integer


string Plevel#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:PLEVel
string value = driver.Source.Bb.Eutra.Tcw.Is.Plevel;

Queries the power level of the interfering signal.

powerLevel: string


EutraTcwPropagCondEnum PrCondition#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:PRCOndition
EutraTcwPropagCondEnum value = driver.Source.Bb.Eutra.Tcw.Is.PrCondition;

Selects a predefined multipath fading propagation conditions. The settings of the fading simulator are adjusted according to the corresponding channel model as defined in 3GPP TS 36.141, Annex B.


int RbcFrequency#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:RBCFrequency
int value = driver.Source.Bb.Eutra.Tcw.Is.RbcFrequency;

Queries the center frequency of the single resource block interfering signal.

rblockCentFreq: integer


int RfFrequency#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:RFFRequency
int value = driver.Source.Bb.Eutra.Tcw.Is.RfFrequency;
driver.Source.Bb.Eutra.Tcw.Is.RfFrequency = 1;

Queries the center frequency of the interfering signal.

rfFrequency: integer


int TddConfig#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:TDDConfig
int value = driver.Source.Bb.Eutra.Tcw.Is.TddConfig;
driver.Source.Bb.Eutra.Tcw.Is.TddConfig = 1;

For TDD mode, selects the UL/DL Configuration number.

tddConfig: integer


UtraTcwtMcodesEnum TmCodes#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:TMCodes
UtraTcwtMcodesEnum value = driver.Source.Bb.Eutra.Tcw.Is.TmCodes;
driver.Source.Bb.Eutra.Tcw.Is.TmCodes = UtraTcwtMcodesEnum.COD16;

Selects a predefined test model 1 signal.

testModel1Codes: COD4 | COD8 | COD16 | COD32 | COD64


TestModelEnum Tmodel#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:TMODel
TestModelEnum value = driver.Source.Bb.Eutra.Tcw.Is.Tmodel;

Queries the test model. The interfering signal is generated according to E-TM1.1 test model.

testModel: TM1_1


TestRequireEnum Trequire#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:TREQuire
TestRequireEnum value = driver.Source.Bb.Eutra.Tcw.Is.Trequire;
driver.Source.Bb.Eutra.Tcw.Is.Trequire = TestRequireEnum.BLPE;

Selects whether the standard out-of-band blocking requirements test is performed (BLPE) or the optional blocking scenario, when the BS is co-located with another BS in a different operating band (COBS) .

testRequire: COBS | BLPE


int UeId#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS:UEID
int value = driver.Source.Bb.Eutra.Tcw.Is.UeId;
driver.Source.Bb.Eutra.Tcw.Is.UeId = 1;

Sets the UE ID/n_RNTI for the interfering signal.

ueIdnRnti: integer