Source:Bb:Eutra:Tcw:Gs#

SCPI Commands

[SOURce<HW>]:BB:EUTRa:TCW:GS:ANTSubset
[SOURce<HW>]:BB:EUTRa:TCW:GS:BSCLass
[SOURce<HW>]:BB:EUTRa:TCW:GS:GENSignals
[SOURce<HW>]:BB:EUTRa:TCW:GS:INSTsetup
[SOURce<HW>]:BB:EUTRa:TCW:GS:MARKerconfig
[SOURce<HW>]:BB:EUTRa:TCW:GS:MODE
[SOURce<HW>]:BB:EUTRa:TCW:GS:OPTion
[SOURce<HW>]:BB:EUTRa:TCW:GS:RELease
[SOURce<HW>]:BB:EUTRa:TCW:GS:RXANtennas
[SOURce<HW>]:BB:EUTRa:TCW:GS:SIGRout
[SOURce<HW>]:BB:EUTRa:TCW:GS:SPEC
[SOURce<HW>]:BB:EUTRa:TCW:GS:STC
[SOURce<HW>]:BB:EUTRa:TCW:GS:TRIGgerconfig
[SOURce<HW>]:BB:EUTRa:TCW:GS:TXANtennas

Direct SCPI Members

EutraTcwaNtSubsetEnum AntSubset#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:GS:ANTSubset
EutraTcwaNtSubsetEnum value = driver.Source.Bb.Eutra.Tcw.Gs.AntSubset;
driver.Source.Bb.Eutra.Tcw.Gs.AntSubset = EutraTcwaNtSubsetEnum.ALL;

Enabled for test setups with eight Rx antennas Determines the signal of which antenna couple, Antenna 1 and 2 (AS12) , Antenna 3 and 4 (AS34) , Antenna 5 and 6 (AS56) or Antenna 7 and 8 (AS78) , is generated by the instrument.

antennaSubset: AS34 | AS12 | ALL | AS56 | AS78


UtraTcwbSclassEnum BsClass#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:GS:BSCLass
UtraTcwbSclassEnum value = driver.Source.Bb.Eutra.Tcw.Gs.BsClass;
driver.Source.Bb.Eutra.Tcw.Gs.BsClass = UtraTcwbSclassEnum.HOME;

Sets the base station class.

bsClass: WIDE | LOCal | HOME | MEDium


EutraTcwGeneratedSigEnum GenSignals#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:GS:GENSignals
EutraTcwGeneratedSigEnum value = driver.Source.Bb.Eutra.Tcw.Gs.GenSignals;
driver.Source.Bb.Eutra.Tcw.Gs.GenSignals = EutraTcwGeneratedSigEnum.ALL;

Determines the signal or signals that the instrument generates.

generatedSignal: IF23 | WSIF1AWGN | WSUE1UE2AWGN | WSUE3UE4 | IF | ALL

  • IF23: Interferers 2 and 3 only; required in test setup with two instruments.

  • WSIF1AWGN: Wanted Signal, Interferer 1 and AWGN only; required in test setup with two instruments.

  • WSUE1UE2AWGN: Only Wanted Signal UE 1, Wanted Signal UE 2 and AWGN

  • WSUE3UE4: Only Wanted Signal UE 3 and Wanted Signal UE 4

  • IF: Interferer signal only

  • ALL: All signals that the test case requires.


EutraTcwiNstSetupEnum InstSetup#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:GS:INSTsetup
EutraTcwiNstSetupEnum value = driver.Source.Bb.Eutra.Tcw.Gs.InstSetup;
driver.Source.Bb.Eutra.Tcw.Gs.InstSetup = EutraTcwiNstSetupEnum.U1PATH;

Determines whether one or both paths are used.

instrumentSetup: U2PATH | U1PATH


EutraTcwMarkConfEnum MarkerConfig#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:GS:MARKerconfig
EutraTcwMarkConfEnum value = driver.Source.Bb.Eutra.Tcw.Gs.MarkerConfig;
driver.Source.Bb.Eutra.Tcw.Gs.MarkerConfig = EutraTcwMarkConfEnum.FRAMe;

Selects the marker configuration. The marker can be used to synchronize the measuring equipment to the signal generator.

markerConfig: UNCHanged | FRAMe

  • FRAMe: The marker settings are customized for the selected test case. Radio Frame Start markers are output; the marker delays are set equal to zero.

  • UNCHanged: The current marker settings of the signal generator are retained unchanged.


EutraTcwGsModeDefaultRangeEnum Mode#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:GS:MODE
EutraTcwGsModeDefaultRangeEnum value = driver.Source.Bb.Eutra.Tcw.Gs.Mode;
driver.Source.Bb.Eutra.Tcw.Gs.Mode = EutraTcwGsModeDefaultRangeEnum.ADRate;

Determines the measurements type, Pfa or Pd, the signal is generated for, see “Mode”.

mode: DRATe | FDRate | ADRate

  • FDRate: False Detection Rate (Pfa)

  • DRATe: Detection Rate (Pd)

  • ADRate: Alternating Pd and Pfa


UtraTcwgsoPtionEnum Option#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:GS:OPTion
UtraTcwgsoPtionEnum value = driver.Source.Bb.Eutra.Tcw.Gs.Option;
driver.Source.Bb.Eutra.Tcw.Gs.Option = UtraTcwgsoPtionEnum.OPT1;

Selects one of the two test case options.

option: OPT1 | OPT2


EutraTcwReleaseEnum Release#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:GS:RELease
EutraTcwReleaseEnum value = driver.Source.Bb.Eutra.Tcw.Gs.Release;
driver.Source.Bb.Eutra.Tcw.Gs.Release = EutraTcwReleaseEnum.REL10;

Sets the 3GPP test specification used as a guideline for the test cases.

release: REL8 | REL9 | REL10 | REL11 | REL12 | REL13TO15


EutraTcwNumOfRxAntEnum RxAntennas#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:GS:RXANtennas
EutraTcwNumOfRxAntEnum value = driver.Source.Bb.Eutra.Tcw.Gs.RxAntennas;
driver.Source.Bb.Eutra.Tcw.Gs.RxAntennas = EutraTcwNumOfRxAntEnum.ANT1;

For performance requirement tests, determines the number of the Rx antennas.

numOfRxAntennas: ANT4 | ANT2 | ANT1


EutraTcwSignalRoutEnum SigRout#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:GS:SIGRout
EutraTcwSignalRoutEnum value = driver.Source.Bb.Eutra.Tcw.Gs.SigRout;
driver.Source.Bb.Eutra.Tcw.Gs.SigRout = EutraTcwSignalRoutEnum.PORTA;

Selects the signal routing for baseband A signal which usually represents the wanted signal.

signalRouting: PORTA | PORTB


UtraTcwsPecEnum Spec#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:GS:SPEC
UtraTcwsPecEnum value = driver.Source.Bb.Eutra.Tcw.Gs.Spec;
driver.Source.Bb.Eutra.Tcw.Gs.Spec = UtraTcwsPecEnum.TS36141;

Selects the 3GPP test specification used as a guideline for the test cases.

gsSpec: TS36141


UtraTcwgssUbtestEnum Stc#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:GS:STC
UtraTcwgssUbtestEnum value = driver.Source.Bb.Eutra.Tcw.Gs.Stc;
driver.Source.Bb.Eutra.Tcw.Gs.Stc = UtraTcwgssUbtestEnum.STC1;

Selects the subtest case.

subTestCase: STC1 | STC2 | STC4 | STC3


EutraTcwtRigConfEnum TriggerConfig#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:GS:TRIGgerconfig
EutraTcwtRigConfEnum value = driver.Source.Bb.Eutra.Tcw.Gs.TriggerConfig;
driver.Source.Bb.Eutra.Tcw.Gs.TriggerConfig = EutraTcwtRigConfEnum.AAUTo;

Selects the trigger configuration. The trigger is used to synchronize the signal generator to the other equipment.

triggerConfig: UNCHanged | AAUTo

  • UNCHanged: The current trigger settings of the signal generator are retained unchanged.

  • AAUTo: The trigger settings are customized for the selected test case.The trigger setting Armed Auto with external trigger source is used; the trigger delay is set to zero.Thus, the base station frame timing is able to synchronize the signal generator by a periodic trigger.


TxAntennaEnum TxAntennas#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:GS:TXANtennas
TxAntennaEnum value = driver.Source.Bb.Eutra.Tcw.Gs.TxAntennas;
driver.Source.Bb.Eutra.Tcw.Gs.TxAntennas = TxAntennaEnum.ANT1;

For performance requirement tests, determines the number of the Tx antennas.

numOfTxAntennas: ANT1 | ANT2