Source:Bb:Eutra:Tcw:Is2#

SCPI Commands

[SOURce<HW>]:BB:EUTRa:TCW:IS2:CHBW
[SOURce<HW>]:BB:EUTRa:TCW:IS2:CLID
[SOURce<HW>]:BB:EUTRa:TCW:IS2:DUPLex
[SOURce<HW>]:BB:EUTRa:TCW:IS2:IFTYpe
[SOURce<HW>]:BB:EUTRa:TCW:IS2:ORTCover
[SOURce<HW>]:BB:EUTRa:TCW:IS2:PLEVel
[SOURce<HW>]:BB:EUTRa:TCW:IS2:PRCOndition
[SOURce<HW>]:BB:EUTRa:TCW:IS2:RFFRequency
[SOURce<HW>]:BB:EUTRa:TCW:IS2:UEID

Direct SCPI Members

EutraTcwcHanBwEnum Chbw#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:CHBW
EutraTcwcHanBwEnum value = driver.Source.Bb.Eutra.Tcw.Is2.Chbw;

Queries the channel bandwidth of the interfering signal in MHz: 20, 10, 5, 3, 1.4, 15, or 0.2 MHz.

channelBandwidth: BW20_00 | BW10_00 | BW5_00 | BW3_00 | BW1_40 | BW15_00 | BW00_20


int Clid#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:CLID
int value = driver.Source.Bb.Eutra.Tcw.Is2.Clid;

Sets the Cell ID for the second interfering signal.

is2Cellid: integer


EutraDuplexModeEnum Duplex#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:DUPLex
EutraDuplexModeEnum value = driver.Source.Bb.Eutra.Tcw.Is2.Duplex;
driver.Source.Bb.Eutra.Tcw.Is2.Duplex = EutraDuplexModeEnum.FDD;

Selects whether TDD or FDD duplexing mode is used.


EutraTcwInterfTypeEnum IfType#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:IFTYpe
EutraTcwInterfTypeEnum value = driver.Source.Bb.Eutra.Tcw.Is2.IfType;

Selects the type of the interfering signal:

  • For Blocking tests, the interfering signal can be an in-band EUTRA/LTE signal (EUTra) or out-of-band CW signal (CW) .

  • For Receiver Intermodulation tests, the first interfering signal can be an EUTRA/LTE signal (EUTra) or narrowband EUTRA signal (NEUTra) . The second interfering signal is always a CW signal (CW) .

interfererType: NEUTra | EUTra | CW | UTRA


int OrtCover#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:ORTCover
int value = driver.Source.Bb.Eutra.Tcw.Is2.OrtCover;

Queries the used resource index n_PUCCH.

orthoCover: integer


string Plevel#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:PLEVel
string value = driver.Source.Bb.Eutra.Tcw.Is2.Plevel;

Queries the power level of the interfering signal.

powerLevel: string


EutraTcwPropagCondEnum PrCondition#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:PRCOndition
EutraTcwPropagCondEnum value = driver.Source.Bb.Eutra.Tcw.Is2.PrCondition;

Selects a predefined multipath fading propagation conditions. The settings of the fading simulator are adjusted according to the corresponding channel model as defined in 3GPP TS 36.141, Annex B.


int RfFrequency#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:RFFRequency
int value = driver.Source.Bb.Eutra.Tcw.Is2.RfFrequency;
driver.Source.Bb.Eutra.Tcw.Is2.RfFrequency = 1;

Queries the center frequency of the interfering signal.

rfFrequency: integer


int UeId#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:UEID
int value = driver.Source.Bb.Eutra.Tcw.Is2.UeId;
driver.Source.Bb.Eutra.Tcw.Is2.UeId = 1;

Sets the UE ID/n_RNTI for the second interfering signal.

is2Ueid: integer