Source:Bb:Eutra#
SCPI Commands
- [SOURce<HW>]:BB:EUTRa:DUPLexing
- [SOURce<HW>]:BB:EUTRa:LINK
- [SOURce<HW>]:BB:EUTRa:PRESet
- [SOURce<HW>]:BB:EUTRa:SLENgth
- [SOURce<HW>]:BB:EUTRa:STATe
- [SOURce<HW>]:BB:EUTRa:STDMode
- [SOURce<HW>]:BB:EUTRa:SUSLen
- [SOURce]:BB:EUTRa:VERSion
Cloning the Group
// Create a clone of the original group, that exists independently
var eutra2 = driver.Source.Bb.Eutra.Clone();
Direct SCPI Members
- EutraDuplexModeEnum Duplexing#
// SCPI: [SOURce<HW>]:BB:EUTRa:DUPLexing EutraDuplexModeEnum value = driver.Source.Bb.Eutra.Duplexing; driver.Source.Bb.Eutra.Duplexing = EutraDuplexModeEnum.FDD;Sets the duplexing mode.
duplexing: TDD | FDD
- UpDownDirectionEnum Link#
// SCPI: [SOURce<HW>]:BB:EUTRa:LINK UpDownDirectionEnum value = driver.Source.Bb.Eutra.Link; driver.Source.Bb.Eutra.Link = UpDownDirectionEnum.DOWN;Sets the transmission direction.
link: UP | DOWN
- void Preset ( )#
- void PresetAndWait ( )#
- void PresetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:BB:EUTRa:PRESet driver.Source.Bb.Eutra.Preset(); driver.Source.Bb.Eutra.PresetAndWait(); driver.Source.Bb.Eutra.PresetAndWait(1000);Sets all parameters of the application to their default values. These values are the *RST values of the commands of the application.
PresetAndWait is the same as Preset, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value
RsSmw.Utilities.OpcTimeout.
- int Slength#
// SCPI: [SOURce<HW>]:BB:EUTRa:SLENgth int value = driver.Source.Bb.Eutra.Slength; driver.Source.Bb.Eutra.Slength = 1;Sets the sequence length of the signal in number of frames. The signal is calculated in advance and output in the arbitrary waveform generator. The maximum number of frames is calculated as follows: Max. No. of Frames = Arbitrary waveform memory size/(sampling rate x 10 ms) .
slength: integer
- bool State#
// SCPI: [SOURce<HW>]:BB:EUTRa:STATe bool value = driver.Source.Bb.Eutra.State; driver.Source.Bb.Eutra.State = false;Enables the baseband signal application and disables all the other baseband signal applications in the same signal path.
state: 1 | ON | 0| OFF
- EutraStdModeEnum StdMode#
// SCPI: [SOURce<HW>]:BB:EUTRa:STDMode EutraStdModeEnum value = driver.Source.Bb.Eutra.StdMode; driver.Source.Bb.Eutra.StdMode = EutraStdModeEnum.IOT;Sets the supported 3GPP standard.
standardMode: LTE | IOT | LIOT
LTE: Standalone LTE mode.IoT-specific commands containing the keywords EMTC or NIOT are discarded.
IOT: Standalone IoT mode.The commands related to LTE-specific features like carrier aggregation or MBSFN are discarded.
LIOT: Mixed LTE and IoT configuration, for example for interoperability tests.
- int Suslen#
// SCPI: [SOURce<HW>]:BB:EUTRa:SUSLen int value = driver.Source.Bb.Eutra.Suslen; driver.Source.Bb.Eutra.Suslen = 1;Sets the sequence length of the signal in number of subframes. The signal is calculated in advance and output in the arbitrary waveform generator.
subLen: integer
- string Version#
// SCPI: [SOURce]:BB:EUTRa:VERSion string value = driver.Source.Bb.Eutra.Version;Queries the version of the 3GPP standard underlying the definitions.
version: string
Subgroups
- Source:Bb:Eutra:Bbfs
- Source:Bb:Eutra:Clipping
- Source:Bb:Eutra:Clock
- Source:Bb:Eutra:Downlink
- Source:Bb:Eutra:Filter
- Source:Bb:Eutra:LogGen
- Source:Bb:Eutra:Noise
- Source:Bb:Eutra:Notch<NotchFilterRepCap>
- Source:Bb:Eutra:Powc
- Source:Bb:Eutra:Setting
- Source:Bb:Eutra:SymbolRate
- Source:Bb:Eutra:Tcw
- Source:Bb:Eutra:Tdd
- Source:Bb:Eutra:Tdw
- Source:Bb:Eutra:Timc
- Source:Bb:Eutra:Trigger
- Source:Bb:Eutra:Udt
- Source:Bb:Eutra:Uplane
- Source:Bb:Eutra:Uplink
- Source:Bb:Eutra:Waveform