Holdoff

SCPI Command :

[SENSe]:PMETer<p>:TRIGger:HOLDoff

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(powerMeter=PowerMeter.Default) → float

# [SENSe]:PMETer<p>:TRIGger:HOLDoff
value: float = driver.sense.pmeter.trigger.holdoff.get(powerMeter = repcap.PowerMeter.Default)

Defines the trigger holdoff for external power triggers.

Parameters:

powerMeter – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pmeter’)

Returns:

holdoff: Time period that has to pass between the trigger event and the start of the measurement, in case another trigger event occurs. Range: 0 s to 1 s, Unit: S

set(holdoff: float, powerMeter=PowerMeter.Default) → None

# [SENSe]:PMETer<p>:TRIGger:HOLDoff
driver.sense.pmeter.trigger.holdoff.set(holdoff = 1.0, powerMeter = repcap.PowerMeter.Default)

Defines the trigger holdoff for external power triggers.

Parameters:

• holdoff – Time period that has to pass between the trigger event and the start of the measurement, in case another trigger event occurs. Range: 0 s to 1 s, Unit: S

• powerMeter – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pmeter’)