Soffset

SCPI Command :

[SENSe]:PMETer<p>:SOFFset

class SoffsetCls

Soffset commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(powerMeter=PowerMeter.Default) → float

# SCPI: [SENSe]:PMETer<p>:SOFFset
value: float = driver.sense.pmeter.soffset.get(powerMeter = repcap.PowerMeter.Default)

Takes the specified offset into account for the measured power. Only available if [SENSe:]PMETer{p}:ROFFset[:STATe] is disabled.

param powerMeter

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pmeter’)

return

sensor_offset: Unit: DB

set(sensor_offset: float, powerMeter=PowerMeter.Default) → None

# SCPI: [SENSe]:PMETer<p>:SOFFset
driver.sense.pmeter.soffset.set(sensor_offset = 1.0, powerMeter = repcap.PowerMeter.Default)

Takes the specified offset into account for the measured power. Only available if [SENSe:]PMETer{p}:ROFFset[:STATe] is disabled.

param sensor_offset

Unit: DB

param powerMeter

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pmeter’)