Egate

SCPI Command :

[SENSe]:SWEep:EGATe

class EgateCls[source]

Egate commands group definition. 13 total commands, 8 Subgroups, 1 group commands

get() → bool[source]

# SCPI: [SENSe]:SWEep:EGATe
value: bool = driver.applications.k10Xlte.sense.sweep.egate.get()

Turns gated measurements on and off. For measurements with an external trigger gate, the measured values are recorded as long as the gate is opened. During a sweep the gate can be opened and closed several times. The synchronization mechanisms with *OPC, *OPC? and *WAI remain completely unaffected. The measurement ends when a particular number of measurement points has been recorded. (See [SENSe:]SWEep[:WINDow<n>]:POINts) . Performing gated measurements turns the squelch off.

return

state: ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on

set(state: bool) → None[source]

# SCPI: [SENSe]:SWEep:EGATe
driver.applications.k10Xlte.sense.sweep.egate.set(state = False)

Turns gated measurements on and off. For measurements with an external trigger gate, the measured values are recorded as long as the gate is opened. During a sweep the gate can be opened and closed several times. The synchronization mechanisms with *OPC, *OPC? and *WAI remain completely unaffected. The measurement ends when a particular number of measurement points has been recorded. (See [SENSe:]SWEep[:WINDow<n>]:POINts) . Performing gated measurements turns the squelch off.

param state

ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.applications.k10Xlte.sense.sweep.egate.clone()

Subgroups