Auto

SCPI Command :

[SENSe]:SWEep:EGATe:AUTO

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get() → bool[source]

# [SENSe]:SWEep:EGATe:AUTO
value: bool = driver.applications.k10Xlte.sense.sweep.egate.auto.get()

Determines whether the same or different triggers are used for general measurement and gating.

Returns:: state: ON | OFF | 0 | 1 OFF | 0 The gate is opened by the trigger source defined by method RsFsw.sense.sweep.egate.source.set() , but only after a trigger from the general method RsFsw.applications.k91Wlan.trigger.sequence.source.set() occurs. ON | 1 (Default:) The trigger defined by method RsFsw.applications.k91Wlan.trigger.sequence.source.set() is used both for the general measurement trigger and the gating trigger.

set(state: bool) → None[source]

# [SENSe]:SWEep:EGATe:AUTO
driver.applications.k10Xlte.sense.sweep.egate.auto.set(state = False)

Determines whether the same or different triggers are used for general measurement and gating.

Parameters:: state – ON | OFF | 0 | 1 OFF | 0 The gate is opened by the trigger source defined by method RsFsw.sense.sweep.egate.source.set() , but only after a trigger from the general method RsFsw.applications.k91Wlan.trigger.sequence.source.set() occurs. ON | 1 (Default:) The trigger defined by method RsFsw.applications.k91Wlan.trigger.sequence.source.set() is used both for the general measurement trigger and the gating trigger.