Clock

SCPI Commands :

[SOURce<HW>]:BB:ARBitrary:WSEGment:CONFigure:CLOCk:MODE
[SOURce<HW>]:BB:ARBitrary:WSEGment:CONFigure:CLOCk

Commands in total: 2
Subgroups: 0
Direct child commands: 2

get_mode() → ArbWaveSegmClocMode[source]

# [SOURce<HW>]:BB:ARBitrary:WSEGment:CONFigure:CLOCk:MODE
value: enums.ArbWaveSegmClocMode = driver.source.bb.arbitrary.wsegment.configure.clock.get_mode()

Selects the clock rate mode for the multi segment waveform. Use the command method RsSmw.source.bb.arbitrary.wsegment.configure.clock.value() to define the clock in clock mode user.

Returns:: mode: UNCHanged | HIGHest | USER

get_value() → float[source]

# [SOURce<HW>]:BB:ARBitrary:WSEGment:CONFigure:CLOCk
value: float = driver.source.bb.arbitrary.wsegment.configure.clock.get_value()

Defines the clock rate used for multi-segment waveform output, if the clock mode is USER.

Returns:: clock: float

set_mode(mode: ArbWaveSegmClocMode) → None[source]

# [SOURce<HW>]:BB:ARBitrary:WSEGment:CONFigure:CLOCk:MODE
driver.source.bb.arbitrary.wsegment.configure.clock.set_mode(mode = enums.ArbWaveSegmClocMode.HIGHest)

Selects the clock rate mode for the multi segment waveform. Use the command method RsSmw.source.bb.arbitrary.wsegment.configure.clock.value() to define the clock in clock mode user.

Parameters:: mode – UNCHanged | HIGHest | USER

set_value(clock: float) → None[source]

# [SOURce<HW>]:BB:ARBitrary:WSEGment:CONFigure:CLOCk
driver.source.bb.arbitrary.wsegment.configure.clock.set_value(clock = 1.0)

Defines the clock rate used for multi-segment waveform output, if the clock mode is USER.

Parameters:: clock – float