Mcarrier<Carrier>

SCPI Commands :

[SOURce<HW>]:BB:ARBitrary:MCARrier:CLOCk
[SOURce<HW>]:BB:ARBitrary:MCARrier:OFILe
[SOURce<HW>]:BB:ARBitrary:MCARrier:PRESet
[SOURce<HW>]:BB:ARBitrary:MCARrier:SAMPles
Commands in total: 37
Subgroups: 9
Direct child commands: 4

Repeated Capability Setting:

# Range: Nr1 .. Nr64

driver.source.bb.arbitrary.mcarrier.repcap_carrier_set(repcap.Carrier.Nr1)
get_clock() → float[source]
# [SOURce<HW>]:BB:ARBitrary:MCARrier:CLOCk
value: float = driver.source.bb.arbitrary.mcarrier.get_clock()

Queries the resulting sample rate at which the multi-carrier waveform is output by the arbitrary waveform generator. The output clock rate depends on the number of carriers, carrier spacing, and input sample rate of the leftmost or rightmost carriers.

Returns:

clock: float Range: 400 to Max

get_ofile() → str[source]
# [SOURce<HW>]:BB:ARBitrary:MCARrier:OFILe
value: str = driver.source.bb.arbitrary.mcarrier.get_ofile()

Sets the output filename for the multicarrier waveform (file extension wv) . This filename is required to calculate the waveform with the commands method RsSmw.source.bb.arbitrary.mcarrier.cload.set() or method RsSmw.source.bb.arbitrary.mcarrier.create.set() .

Returns:

ofile: string

get_samples() → int[source]
# [SOURce<HW>]:BB:ARBitrary:MCARrier:SAMPles
value: int = driver.source.bb.arbitrary.mcarrier.get_samples()

Queries the resulting file size.

Returns:

samples: integer Range: 0 to INT_MAX, Unit: samples

preset() → None[source]
# [SOURce<HW>]:BB:ARBitrary:MCARrier:PRESet
driver.source.bb.arbitrary.mcarrier.preset()

Sets all the multicarrier parameters to their default values.

preset_with_opc(opc_timeout_ms: int = -1) → None[source]
# [SOURce<HW>]:BB:ARBitrary:MCARrier:PRESet
driver.source.bb.arbitrary.mcarrier.preset_with_opc()

Sets all the multicarrier parameters to their default values.

Same as preset, but waits for the operation to complete before continuing further. Use the RsSmw.utilities.opc_timeout_set() to set the timeout value.

Parameters:

opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.

set_ofile(ofile: str) → None[source]
# [SOURce<HW>]:BB:ARBitrary:MCARrier:OFILe
driver.source.bb.arbitrary.mcarrier.set_ofile(ofile = 'abc')

Sets the output filename for the multicarrier waveform (file extension wv) . This filename is required to calculate the waveform with the commands method RsSmw.source.bb.arbitrary.mcarrier.cload.set() or method RsSmw.source.bb.arbitrary.mcarrier.create.set() .

Parameters:

ofile – string

Cloning the Group

# Create a copy of the original group, that exists independently
mcarrier_copy = driver.source.bb.arbitrary.mcarrier.clone()

Subgroups