Marker

SCPI Commands :

[SOURce<HW>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:ESEGment
[SOURce<HW>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:FSEGment
[SOURce<HW>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:MODE

Commands in total: 3

Subgroups: 0

Direct child commands: 3

get_esegment() → ArbWaveSegmRest

# [SOURce<HW>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:ESEGment
value: enums.ArbWaveSegmRest = driver.source.bb.arbitrary.wsegment.configure.marker.get_esegment()

Enables/disables the generation of an additional marker restart signal at the beginning of the first segment (FSEGment) or at the beginning of each segment (ESEGment) . If additional marker generation is enabled, the existing marker signals in the individual segment waveform files are not considered.

Returns:

mode: OFF | MRK1 | MRK2 | MRK3 | MRK4

get_fsegment() → ArbWaveSegmRest

# [SOURce<HW>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:FSEGment
value: enums.ArbWaveSegmRest = driver.source.bb.arbitrary.wsegment.configure.marker.get_fsegment()

Enables/disables the generation of an additional marker restart signal at the beginning of the first segment (FSEGment) or at the beginning of each segment (ESEGment) . If additional marker generation is enabled, the existing marker signals in the individual segment waveform files are not considered.

Returns:

mode: OFF | MRK1 | MRK2 | MRK3 | MRK4

get_mode() → ArbWaveSegmMarkMode

# [SOURce<HW>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:MODE
value: enums.ArbWaveSegmMarkMode = driver.source.bb.arbitrary.wsegment.configure.marker.get_mode()

Defines the way the marker information within the separate segments is processed.

Returns:

mode: IGNore | TAKE

set_esegment(mode: ArbWaveSegmRest) → None

# [SOURce<HW>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:ESEGment
driver.source.bb.arbitrary.wsegment.configure.marker.set_esegment(mode = enums.ArbWaveSegmRest.MRK1)

Enables/disables the generation of an additional marker restart signal at the beginning of the first segment (FSEGment) or at the beginning of each segment (ESEGment) . If additional marker generation is enabled, the existing marker signals in the individual segment waveform files are not considered.

Parameters:

mode – OFF | MRK1 | MRK2 | MRK3 | MRK4

set_fsegment(mode: ArbWaveSegmRest) → None

# [SOURce<HW>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:FSEGment
driver.source.bb.arbitrary.wsegment.configure.marker.set_fsegment(mode = enums.ArbWaveSegmRest.MRK1)

Enables/disables the generation of an additional marker restart signal at the beginning of the first segment (FSEGment) or at the beginning of each segment (ESEGment) . If additional marker generation is enabled, the existing marker signals in the individual segment waveform files are not considered.

Parameters:

mode – OFF | MRK1 | MRK2 | MRK3 | MRK4

set_mode(mode: ArbWaveSegmMarkMode) → None

# [SOURce<HW>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:MODE
driver.source.bb.arbitrary.wsegment.configure.marker.set_mode(mode = enums.ArbWaveSegmMarkMode.IGNore)

Defines the way the marker information within the separate segments is processed.

Parameters:

mode – IGNore | TAKE