Source:Bb:W3Gpp:Mstation:Enhanced:Dpdch:Derror:Bit#
SCPI Commands
- [SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:DERRor:BIT:LAYer
- [SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:DERRor:BIT:RATE
- [SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:DERRor:BIT:STATe
Direct SCPI Members
- EnhBitErrEnum Layer#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:DERRor:BIT:LAYer EnhBitErrEnum value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Derror.Bit.Layer; driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Derror.Bit.Layer = EnhBitErrEnum.PHYSical;The command selects the layer at which bit errors are inserted.
layer: TRANsport | PHYSical
TRANsport: Transport Layer (Layer 2) . This layer is only available when channel coding is active.
PHYSical: Physical layer (Layer 1)
- double Rate#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:DERRor:BIT:RATE double value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Derror.Bit.Rate; driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Derror.Bit.Rate = 1.0;Sets the bit error rate.
rate: float
- bool State#
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:ENHanced:DPDCh:DERRor:BIT:STATe bool value = driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Derror.Bit.State; driver.Source.Bb.W3Gpp.Mstation.Enhanced.Dpdch.Derror.Bit.State = false;The command activates or deactivates bit error generation. Bit errors are inserted into the data fields of the enhanced channels. When channel coding is active, it is possible to select the layer in which the errors are inserted (physical or transport layer) . When the data source is read out, individual bits are deliberately inverted at random points in the data bit stream at the specified error rate in order to simulate an invalid signal.
state: 1 | ON | 0| OFF