Source:Bb:Nfc:Pred#
SCPI Commands
- [SOURce<HW>]:BB:NFC:PRED:CNFMarker
- [SOURce<HW>]:BB:NFC:PRED:SEQuence
Cloning the Group
// Create a clone of the original group, that exists independently
var pred2 = driver.Source.Bb.Nfc.Pred.Clone();
Direct SCPI Members
- bool CnfMarker#
// SCPI: [SOURce<HW>]:BB:NFC:PRED:CNFMarker bool value = driver.Source.Bb.Nfc.Pred.CnfMarker; driver.Source.Bb.Nfc.Pred.CnfMarker = false;If enabled marker 1 is positioned after the first idle.
conf: 1 | ON | 0| OFF
- NfcPredefEnum Sequence#
// SCPI: [SOURce<HW>]:BB:NFC:PRED:SEQuence NfcPredefEnum value = driver.Source.Bb.Nfc.Pred.Sequence; driver.Source.Bb.Nfc.Pred.Sequence = NfcPredefEnum.APA;Available only for Transmission Mode > Poll and Transmission Mode > PCD to PICC. Selects a predefined sequence.
sequence: FPS | BPA | BPS | APA | APS
FPS: Predefined NFC-F sequence with the elements: IDLE, SENSF_REQ, IDLE, BLANK
BPA: Predefined NFC-B sequence with the elements: IDLE, ALL_REQ, IDLE, BLANK or a predefined EMV Type A sequence with the elements: IDLE, WUPB, IDLE, BLANK
BPS: Predefined NFC-B sequence with the elements: IDLE, SENS_REQ, IDLE, BLANK or a predefined EMV Type B sequence with the elements: IDLE, REQB, IDLE, BLANK
APA: Predefined NFC-A sequence with the elements: IDLE, ALL_REQ, IDLE, BLANK or a predefined EMV Type A sequence with the elements: IDLE, WUPA, IDLE, BLANK
APS: Predefined NFC-A sequence with the elements: IDLE, SENS_REQ, IDLE, BLANK or a predefined EMV Type A sequence with the elements: IDLE, REQA, IDLE, BLANK
Subgroups