Source:Bb:Nfc:Mset#

SCPI Commands

[SOURce<HW>]:BB:NFC:MSET:BOUTput
[SOURce<HW>]:BB:NFC:MSET:BRATe
[SOURce<HW>]:BB:NFC:MSET:IMODulation
[SOURce<HW>]:BB:NFC:MSET:MDEPth
[SOURce<HW>]:BB:NFC:MSET:MINDex
[SOURce<HW>]:BB:NFC:MSET:OSRise
[SOURce<HW>]:BB:NFC:MSET:RCURve
[SOURce<HW>]:BB:NFC:MSET:SLOPe
[SOURce<HW>]:BB:NFC:MSET:SRATe
[SOURce<HW>]:BB:NFC:MSET:TFALl
[SOURce<HW>]:BB:NFC:MSET:TLOW
[SOURce<HW>]:BB:NFC:MSET:TRISe
[SOURce<HW>]:BB:NFC:MSET:USFall

Direct SCPI Members

bool Boutput#
// SCPI: [SOURce<HW>]:BB:NFC:MSET:BOUTput
bool value = driver.Source.Bb.Nfc.Mset.Boutput;
driver.Source.Bb.Nfc.Mset.Boutput = false;

When activated the signal at the baseband output changes between 0% and 100% voltage to be able to control the Reference Listeners.

boutput: 1 | ON | 0| OFF


double Brate#
// SCPI: [SOURce<HW>]:BB:NFC:MSET:BRATe
double value = driver.Source.Bb.Nfc.Mset.Brate;

Returns the resulting bitrate for the current settings.

brate: float


bool Imodulation#
// SCPI: [SOURce<HW>]:BB:NFC:MSET:IMODulation
bool value = driver.Source.Bb.Nfc.Mset.Imodulation;
driver.Source.Bb.Nfc.Mset.Imodulation = false;

When selected, inverse modulation will be used.

imodulation: 1 | ON | 0| OFF


double Mdepth#
// SCPI: [SOURce<HW>]:BB:NFC:MSET:MDEPth
double value = driver.Source.Bb.Nfc.Mset.Mdepth;
driver.Source.Bb.Nfc.Mset.Mdepth = 1.0;

Sets the modulation depth in %.

mdepth: float


double Mindex#
// SCPI: [SOURce<HW>]:BB:NFC:MSET:MINDex
double value = driver.Source.Bb.Nfc.Mset.Mindex;
driver.Source.Bb.Nfc.Mset.Mindex = 1.0;

Defines the signal’s modulation index in %.

mindex: float


double Osrise#
// SCPI: [SOURce<HW>]:BB:NFC:MSET:OSRise
double value = driver.Source.Bb.Nfc.Mset.Osrise;
driver.Source.Bb.Nfc.Mset.Osrise = 1.0;

Determines the size of the overshoot after the rising slope.

orise: float


bool Rcurve#
// SCPI: [SOURce<HW>]:BB:NFC:MSET:RCURve
bool value = driver.Source.Bb.Nfc.Mset.Rcurve;
driver.Source.Bb.Nfc.Mset.Rcurve = false;

When activated an “RLC curve” is applied to the signal, otherwise a linear ramp is used.

rcurve: 1 | ON | 0| OFF


bool Slope#
// SCPI: [SOURce<HW>]:BB:NFC:MSET:SLOPe
bool value = driver.Source.Bb.Nfc.Mset.Slope;
driver.Source.Bb.Nfc.Mset.Slope = false;

Determines the transition between the modulated and unmodulated parts (Edge/Slope) .

eslope: 1 | ON | 0| OFF


double SymbolRate#
// SCPI: [SOURce<HW>]:BB:NFC:MSET:SRATe
double value = driver.Source.Bb.Nfc.Mset.SymbolRate;
driver.Source.Bb.Nfc.Mset.SymbolRate = 1.0;

Enters the sample rate, i.e. the time resolution of the generated signal.

srate: float


double Tfall#
// SCPI: [SOURce<HW>]:BB:NFC:MSET:TFALl
double value = driver.Source.Bb.Nfc.Mset.Tfall;
driver.Source.Bb.Nfc.Mset.Tfall = 1.0;

Defines the fall time (90 to 5 %) in μs.

tfall: float


double Tlow#
// SCPI: [SOURce<HW>]:BB:NFC:MSET:TLOW
double value = driver.Source.Bb.Nfc.Mset.Tlow;
driver.Source.Bb.Nfc.Mset.Tlow = 1.0;

Defines the signals low time (below 5%) in µs.

tlow: float


double Trise#
// SCPI: [SOURce<HW>]:BB:NFC:MSET:TRISe
double value = driver.Source.Bb.Nfc.Mset.Trise;
driver.Source.Bb.Nfc.Mset.Trise = 1.0;

Defines the signals rise time (5 to 90 %) in μs.

trise: float


double Usfall#
// SCPI: [SOURce<HW>]:BB:NFC:MSET:USFall
double value = driver.Source.Bb.Nfc.Mset.Usfall;
driver.Source.Bb.Nfc.Mset.Usfall = 1.0;

Determines the size of the undershoot (ringing) after the falling slope.

ofall: float