Source:Bb:Nfc#

SCPI Commands

[SOURce<HW>]:BB:NFC:CCBLock
[SOURce<HW>]:BB:NFC:DCBLock
[SOURce<HW>]:BB:NFC:DIVisor
[SOURce<HW>]:BB:NFC:DVOLtage
[SOURce<HW>]:BB:NFC:ICBLock
[SOURce<HW>]:BB:NFC:PCBLock
[SOURce<HW>]:BB:NFC:PRESet
[SOURce<HW>]:BB:NFC:STATe
[SOURce<HW>]:BB:NFC:TECHnology
[SOURce<HW>]:BB:NFC:TMODe
[SOURce<HW>]:BB:NFC:UPVoltage
[SOURce<HW>]:BB:NFC:VERSion

Cloning the Group

// Create a clone of the original group, that exists independently
var nfc2 = driver.Source.Bb.Nfc.Clone();

Direct SCPI Members

int CcBlock#
// SCPI: [SOURce<HW>]:BB:NFC:CCBLock

driver.Source.Bb.Nfc.CcBlock = 1;

Copies a command block for later use.

CcBlock: integer


int DcBlock#
// SCPI: [SOURce<HW>]:BB:NFC:DCBLock

driver.Source.Bb.Nfc.DcBlock = 1;

Removes a command block from the command sequence.

DcBlock: integer


NfcDivForModEnum Divisor#
// SCPI: [SOURce<HW>]:BB:NFC:DIVisor
NfcDivForModEnum value = driver.Source.Bb.Nfc.Divisor;
driver.Source.Bb.Nfc.Divisor = NfcDivForModEnum.DIV2;

Selects the divisor and thus the datarate for technology NFC-F.

divForMod: DIV2 | DIV4


double Dvoltage#
// SCPI: [SOURce<HW>]:BB:NFC:DVOLtage
double value = driver.Source.Bb.Nfc.Dvoltage;
driver.Source.Bb.Nfc.Dvoltage = 1.0;

Sets the desired voltage in unmodulated signal parts.

dvoltage: float


int IcBlock#
// SCPI: [SOURce<HW>]:BB:NFC:ICBLock

driver.Source.Bb.Nfc.IcBlock = 1;

Inserts a default command block before the selected command block. The command block with this position must be existing, otherwise an error is returned.

IcBlock: integer


int PcBlock#
// SCPI: [SOURce<HW>]:BB:NFC:PCBLock

driver.Source.Bb.Nfc.PcBlock = 1;

Pastes a command block (which was copied before) at the given position into the command sequence.

PcBlock: integer


void Preset ( )#
void PresetAndWait ( )#
void PresetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:BB:NFC:PRESet
driver.Source.Bb.Nfc.Preset();
driver.Source.Bb.Nfc.PresetAndWait();
driver.Source.Bb.Nfc.PresetAndWait(1000);

Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:BB:NFC:STATe.

PresetAndWait is the same as Preset, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value RsSmw.Utilities.OpcTimeout.


bool State#
// SCPI: [SOURce<HW>]:BB:NFC:STATe
bool value = driver.Source.Bb.Nfc.State;
driver.Source.Bb.Nfc.State = false;

Activates the standard and deactivates all the other digital standards and digital modulation modes in the same path.

state: 1 | ON | 0| OFF


NfcProtocolModeEnum Technology#
// SCPI: [SOURce<HW>]:BB:NFC:TECHnology
NfcProtocolModeEnum value = driver.Source.Bb.Nfc.Technology;
driver.Source.Bb.Nfc.Technology = NfcProtocolModeEnum.EMVA;

Selects the NFC/EMV technology.

protocol: NFCA | NFCB | NFCF | EMVA | EMVB


NfcTransModeEnum Tmode#
// SCPI: [SOURce<HW>]:BB:NFC:TMODe
NfcTransModeEnum value = driver.Source.Bb.Nfc.Tmode;
driver.Source.Bb.Nfc.Tmode = NfcTransModeEnum.LISTen;

Selects the transmission mode.

transmission: POLL | LISTen


int UpVoltage#
// SCPI: [SOURce<HW>]:BB:NFC:UPVoltage
int value = driver.Source.Bb.Nfc.UpVoltage;

Displays the ratio of the voltage in the unmodulated parts of the signal to its peak value.

upVoltage: integer


string Version#
// SCPI: [SOURce<HW>]:BB:NFC:VERSion
string value = driver.Source.Bb.Nfc.Version;

Queries the version of the NFC-Forum and EMVCo specifications used for the signal generation.

version: string


Subgroups