Source:Bb:LrWpan#
SCPI Commands
- [SOURce<HW>]:BB:LRWPan:PRESet
- [SOURce<HW>]:BB:LRWPan:SLENgth
- [SOURce<HW>]:BB:LRWPan:STATe
- [SOURce<HW>]:BB:LRWPan:STD
Cloning the Group
// Create a clone of the original group, that exists independently
var lrWpan2 = driver.Source.Bb.LrWpan.Clone();
Direct SCPI Members
- void Preset ( )#
- void PresetAndWait ( )#
- void PresetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:BB:LRWPan:PRESet driver.Source.Bb.LrWpan.Preset(); driver.Source.Bb.LrWpan.PresetAndWait(); driver.Source.Bb.LrWpan.PresetAndWait(1000);Sets all parameters of the application to their default values. These values are the *RST values of the commands of the application.
PresetAndWait is the same as Preset, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value
RsSmw.Utilities.OpcTimeout.
- int Slength#
// SCPI: [SOURce<HW>]:BB:LRWPan:SLENgth int value = driver.Source.Bb.LrWpan.Slength; driver.Source.Bb.LrWpan.Slength = 1;Sets the sequence length of the signal in number of frames. The signal is calculated in advance and output in the arbitrary waveform generator. The maximum number of frames is calculated as follows: Max. No. of Frames = Arbitrary waveform memory size/(sampling rate x 10 ms) .
slength: integer
- bool State#
// SCPI: [SOURce<HW>]:BB:LRWPan:STATe bool value = driver.Source.Bb.LrWpan.State; driver.Source.Bb.LrWpan.State = false;Enables the baseband signal application and disables all the other baseband signal applications in the same signal path.
hrpUwbState: 1 | ON | 0| OFF
- HrpUwbModeEnum Std#
// SCPI: [SOURce<HW>]:BB:LRWPan:STD HrpUwbModeEnum value = driver.Source.Bb.LrWpan.Std; driver.Source.Bb.LrWpan.Std = HrpUwbModeEnum.BPRF;Sets the 802.15.4 mode.
mode: NONHRP | BPRF | HPRF | OQPSK | MMS | EHPRF | SENS | SYNSFD
NONHRP: Enables HRP non-ERDEV mode.
BPRF: Enables HRP-ERDEV base pulse repetition frequency (BPRF) mode.
HPRF: Enables HRP-ERDEV higher pulse repetition frequency (HPRF) mode.
OQPSK: Option: R&S SMW-K180.Enables 802.15.4 with O-QPSK modulation mode.
MMS: Option: R&S SMW-K181.Enables multi-millisecond advanced ranging (MMS) mode.
EHPRF: Option: R&S SMW-K181.Enables enhanced modulation and low latency (EM+LLD) mode
SENS: Option: R&S SMW-K182.Enables sensing mode.
SYNSFD: Enables SYN+SFD mode. The SYN packet and the SFD packet without the DATA part is sent.
Subgroups
- Source:Bb:LrWpan:Clipping
- Source:Bb:LrWpan:Clock
- Source:Bb:LrWpan:Emlld
- Source:Bb:LrWpan:Filter
- Source:Bb:LrWpan:Huwb
- Source:Bb:LrWpan:Impairments
- Source:Bb:LrWpan:Mms
- Source:Bb:LrWpan:Oqpsk
- Source:Bb:LrWpan:Sens
- Source:Bb:LrWpan:Setting
- Source:Bb:LrWpan:SymbolRate
- Source:Bb:LrWpan:Trigger
- Source:Bb:LrWpan:Waveform