Source:Bb:LrWpan:Emlld#
SCPI Commands
- [SOURce<HW>]:BB:LRWPan:EMLLd:CCT
- [SOURce<HW>]:BB:LRWPan:EMLLd:SRF
- [SOURce<HW>]:BB:[LRWPan]:EMLLd:ASL
- [SOURce<HW>]:BB:[LRWPan]:EMLLd:ASN
- [SOURce<HW>]:BB:[LRWPan]:EMLLd:BWIDth
- [SOURce<HW>]:BB:[LRWPan]:EMLLd:CNUMber
- [SOURce<HW>]:BB:[LRWPan]:EMLLd:F2MS
- [SOURce<HW>]:BB:[LRWPan]:EMLLd:IINTerval
Cloning the Group
// Create a clone of the original group, that exists independently
var emlld2 = driver.Source.Bb.LrWpan.Emlld.Clone();
Direct SCPI Members
- HrpUwbConvConsLenDrmEnum Cct#
// SCPI: [SOURce<HW>]:BB:LRWPan:EMLLd:CCT HrpUwbConvConsLenDrmEnum value = driver.Source.Bb.LrWpan.Emlld.Cct; driver.Source.Bb.LrWpan.Emlld.Cct = HrpUwbConvConsLenDrmEnum.CL3;Requires [:SOURce<hw>]:BB:LRWPan | HUWB:STD EHPRF | SENS. Sets the channel code type. The channel code type depends on the selected PHR data rate mode.
cccl: CL3 | CL7 | LDPC
- bool Srf#
// SCPI: [SOURce<HW>]:BB:LRWPan:EMLLd:SRF bool value = driver.Source.Bb.LrWpan.Emlld.Srf; driver.Source.Bb.LrWpan.Emlld.Srf = false;Sets the RF output frequency automatically to the value of the channel center frequency according to the selected channel number. You can still adjust the RF frequency afterwards.
setRf: 1 | ON | 0| OFF
- HrpUwbActSegmentLengthEnum Asl#
// SCPI: [SOURce<HW>]:BB:[LRWPan]:EMLLd:ASL HrpUwbActSegmentLengthEnum value = driver.Source.Bb.LrWpan.Emlld.Asl; driver.Source.Bb.LrWpan.Emlld.Asl = HrpUwbActSegmentLengthEnum.ASL_1024;Sets the active segment length.
actSegLength: ASL_16 | ASL_32 | ASL_64 | ASL_128 | ASL_256 | ASL_512 | ASL_1024 | ASL_2048
- HrpUwbActSegmentNumEnum Asn#
// SCPI: [SOURce<HW>]:BB:[LRWPan]:EMLLd:ASN HrpUwbActSegmentNumEnum value = driver.Source.Bb.LrWpan.Emlld.Asn; driver.Source.Bb.LrWpan.Emlld.Asn = HrpUwbActSegmentNumEnum.ASN_1;Requires [:SOURce<hw>]:BB:LRWPan | HUWB:STD BPRF | HPRF. Requires [:SOURce<hw>]:BB:LRWPan | HUWB:STD EHPRF. Requires [:SOURce<hw>]:BB:LRWPan | HUWB:STD SENS. Sets the number of active segments.
acgSegNumber: ASN_1 | ASN_2 | ASN_3 | ASN_4
- double Bandwidth#
// SCPI: [SOURce<HW>]:BB:[LRWPan]:EMLLd:BWIDth double value = driver.Source.Bb.LrWpan.Emlld.Bandwidth;Queries the channel bandwidth. The bandwidth depends on the channel number.
- int Cnumber#
// SCPI: [SOURce<HW>]:BB:[LRWPan]:EMLLd:CNUMber int value = driver.Source.Bb.LrWpan.Emlld.Cnumber; driver.Source.Bb.LrWpan.Emlld.Cnumber = 1;Sets the channel number that is a 4-bit value in decimal representation. The channel number determines the bandwidth and the code index.
channelNumber: integer
- bool F2ms#
// SCPI: [SOURce<HW>]:BB:[LRWPan]:EMLLd:F2MS bool value = driver.Source.Bb.LrWpan.Emlld.F2ms; driver.Source.Bb.LrWpan.Emlld.F2ms = false;Sets the frame length of a generated waveform shorter than 2 ms to a fixed value of 2 ms. If activated, the idle interval is set to 0.0 µs by default. Generated waveforms longer than 2 ms remain unaffected.
fixed2MsFrame: 1 | ON | 0| OFF
- double Iinterval#
// SCPI: [SOURce<HW>]:BB:[LRWPan]:EMLLd:IINTerval double value = driver.Source.Bb.LrWpan.Emlld.Iinterval; driver.Source.Bb.LrWpan.Emlld.Iinterval = 1.0;Sets the time of the interval separating two frames.
iinterval: float
Subgroups