Source:Bb:LrWpan:Sens#

SCPI Commands

[SOURce<HW>]:BB:LRWPan:SENS:CCT
[SOURce<HW>]:BB:LRWPan:SENS:RSTU
[SOURce<HW>]:BB:LRWPan:SENS:SGAP
[SOURce<HW>]:BB:LRWPan:SENS:SPC
[SOURce<HW>]:BB:LRWPan:SENS:SPDuration
[SOURce<HW>]:BB:LRWPan:SENS:SRF
[SOURce<HW>]:BB:LRWPan:SENS:SSDuration
[SOURce<HW>]:BB:LRWPan:SENS:SSOFfset
[SOURce<HW>]:BB:[LRWPan]:SENS:ASL
[SOURce<HW>]:BB:[LRWPan]:SENS:ASN
[SOURce<HW>]:BB:[LRWPan]:SENS:BWIDth
[SOURce<HW>]:BB:[LRWPan]:SENS:CNUMber
[SOURce<HW>]:BB:[LRWPan]:SENS:F2MS
[SOURce<HW>]:BB:[LRWPan]:SENS:IINTerval

Cloning the Group

// Create a clone of the original group, that exists independently
var sens2 = driver.Source.Bb.LrWpan.Sens.Clone();

Direct SCPI Members

HrpUwbConvConsLenDrmEnum Cct#
// SCPI: [SOURce<HW>]:BB:LRWPan:SENS:CCT
HrpUwbConvConsLenDrmEnum value = driver.Source.Bb.LrWpan.Sens.Cct;
driver.Source.Bb.LrWpan.Sens.Cct = HrpUwbConvConsLenDrmEnum.CL3;

Requires [:SOURce<hw>]:BB:LRWPan | HUWB:STD EHPRF | SENS. Sets the channel code type. The channel code type depends on the selected PHR data rate mode.

cccl: CL3 | CL7 | LDPC


int Rstu#
// SCPI: [SOURce<HW>]:BB:LRWPan:SENS:RSTU
int value = driver.Source.Bb.LrWpan.Sens.Rstu;

Queries the size of the ranging scheduling time unit (RSTU) .

rstu: integer


HrpUwbSilentGapEnum Sgap#
// SCPI: [SOURce<HW>]:BB:LRWPan:SENS:SGAP
HrpUwbSilentGapEnum value = driver.Source.Bb.LrWpan.Sens.Sgap;
driver.Source.Bb.LrWpan.Sens.Sgap = HrpUwbSilentGapEnum.SG0;

Queries or sets the value of the gap before and after the SENS part in the sensing package. Setting the value requires [:SOURce<hw>]:BB:LRWPan:SENS:SPC SPCU.

silentGap: SG0 | SG1 | SG40


HrpUwbSenspAcketConfigEnum Spc#
// SCPI: [SOURce<HW>]:BB:LRWPan:SENS:SPC
HrpUwbSenspAcketConfigEnum value = driver.Source.Bb.LrWpan.Sens.Spc;
driver.Source.Bb.LrWpan.Sens.Spc = HrpUwbSenspAcketConfigEnum.SPC0;

Sets the sensing packet configuration.

packetConfig: SPC0 | SPC1 | SPC2 | SPCU

  • SPC0 | SPC1 | SPC2: Provide the sensing packet format according to P802.15.4ab/D02.

  • SPCU: Provides no SYNC and no SFD field. The format provides the SENS active packet in between two silent gaps.


int SpDuration#
// SCPI: [SOURce<HW>]:BB:LRWPan:SENS:SPDuration
int value = driver.Source.Bb.LrWpan.Sens.SpDuration;
driver.Source.Bb.LrWpan.Sens.SpDuration = 1;

Sets the sensing phase duration. You can configure how many sensing slots define a sensing phase.

sensPhaseDur: integer


bool Srf#
// SCPI: [SOURce<HW>]:BB:LRWPan:SENS:SRF
bool value = driver.Source.Bb.LrWpan.Sens.Srf;
driver.Source.Bb.LrWpan.Sens.Srf = false;

Sets the RF output frequency automatically to the value of the channel center frequency according to the selected channel number. You can still adjust the RF frequency afterwards.

setRf: 1 | ON | 0| OFF


HrpUwbMmsrSlotDurEnum SsDuration#
// SCPI: [SOURce<HW>]:BB:LRWPan:SENS:SSDuration
HrpUwbMmsrSlotDurEnum value = driver.Source.Bb.LrWpan.Sens.SsDuration;
driver.Source.Bb.LrWpan.Sens.SsDuration = HrpUwbMmsrSlotDurEnum.SD12;

Sets the duration of a sensing slot in RSTU (ranging scheduling time unit) .

sensSlotDur: SD3 | SD6 | SD9 | SD12 | SD15 | SD18 | SD21 | SD24


int SsOffset#
// SCPI: [SOURce<HW>]:BB:LRWPan:SENS:SSOFfset
int value = driver.Source.Bb.LrWpan.Sens.SsOffset;
driver.Source.Bb.LrWpan.Sens.SsOffset = 1;

Sets an offset of a defined amount of slots before the sensing phase starts.

sensStartOffset: integer


HrpUwbActSegmentLengthEnum Asl#
// SCPI: [SOURce<HW>]:BB:[LRWPan]:SENS:ASL
HrpUwbActSegmentLengthEnum value = driver.Source.Bb.LrWpan.Sens.Asl;
driver.Source.Bb.LrWpan.Sens.Asl = HrpUwbActSegmentLengthEnum.ASL_1024;

Sets the active segment length.

actSegLength: ASL_16 | ASL_32 | ASL_64 | ASL_128 | ASL_256 | ASL_512 | ASL_1024 | ASL_2048


HrpUwbActSegmentNumEnum Asn#
// SCPI: [SOURce<HW>]:BB:[LRWPan]:SENS:ASN
HrpUwbActSegmentNumEnum value = driver.Source.Bb.LrWpan.Sens.Asn;
driver.Source.Bb.LrWpan.Sens.Asn = HrpUwbActSegmentNumEnum.ASN_1;

Requires [:SOURce<hw>]:BB:LRWPan | HUWB:STD BPRF | HPRF. Requires [:SOURce<hw>]:BB:LRWPan | HUWB:STD EHPRF. Requires [:SOURce<hw>]:BB:LRWPan | HUWB:STD SENS. Sets the number of active segments.

acgSegNumber: ASN_1 | ASN_2 | ASN_3 | ASN_4


double Bandwidth#
// SCPI: [SOURce<HW>]:BB:[LRWPan]:SENS:BWIDth
double value = driver.Source.Bb.LrWpan.Sens.Bandwidth;

Queries the channel bandwidth. The bandwidth depends on the channel number.


int Cnumber#
// SCPI: [SOURce<HW>]:BB:[LRWPan]:SENS:CNUMber
int value = driver.Source.Bb.LrWpan.Sens.Cnumber;
driver.Source.Bb.LrWpan.Sens.Cnumber = 1;

Sets the channel number that is a 4-bit value in decimal representation. The channel number determines the bandwidth and the code index.

channelNumber: integer


bool F2ms#
// SCPI: [SOURce<HW>]:BB:[LRWPan]:SENS:F2MS
bool value = driver.Source.Bb.LrWpan.Sens.F2ms;
driver.Source.Bb.LrWpan.Sens.F2ms = false;

Sets the frame length of a generated waveform shorter than 2 ms to a fixed value of 2 ms. If activated, the idle interval is set to 0.0 µs by default. Generated waveforms longer than 2 ms remain unaffected.

fixed2MsFrame: 1 | ON | 0| OFF


double Iinterval#
// SCPI: [SOURce<HW>]:BB:[LRWPan]:SENS:IINTerval
double value = driver.Source.Bb.LrWpan.Sens.Iinterval;
driver.Source.Bb.LrWpan.Sens.Iinterval = 1.0;

Sets the time of the interval separating two frames.

iinterval: float


Subgroups