Source:Bb:Esequencer:Trigger:Sequencer:Output:Mode#

SCPI Commands

[SOURce<HW>]:BB:ESEQuencer:TRIGger:[SEQuencer<ST>]:OUTPut<CH>:MODE

Direct SCPI Members

ExtSeqMarkModeEnum Get ( )#
ExtSeqMarkModeEnum Get ( SequencerRepCap sequencer, OutputRepCap output )
void Set ( ExtSeqMarkModeEnum mode )#
void Set ( ExtSeqMarkModeEnum mode, SequencerRepCap sequencer, OutputRepCap output )
// SCPI: [SOURce<HW>]:BB:ESEQuencer:TRIGger:[SEQuencer<ST>]:OUTPut<CH>:MODE
// Get:
ExtSeqMarkModeEnum value = driver.Source.Bb.Esequencer.Trigger.Sequencer.Output.Mode.Get();
ExtSeqMarkModeEnum value = driver.Source.Bb.Esequencer.Trigger.Sequencer.Output.Mode.Get(SequencerRepCap.Default, OutputRepCap.Default);
// Set:
driver.Source.Bb.Esequencer.Trigger.Sequencer.Output.Mode.Set(ExtSeqMarkModeEnum.ADW, SequencerRepCap.Default, OutputRepCap.Default);
driver.Source.Bb.Esequencer.Trigger.Sequencer.Output.Mode.Set(ExtSeqMarkModeEnum.ADW);

Defines the signal for the selected marker output.

mode UNCHanged | STARt | ENTRy | PULSe | PDW | READy | ADW | LINDex | ODW

  • UNCHanged: Provides the marker signal defined in the waveform.

  • ENTRy: Generates a marker signal when enabled in the loaded list file.The [:SOURcehw]:BB:ESEQuencer:TRIGger[:SEQuencerst]:OUTPutch:DURation determines how long the marker signal is high.

  • STARt: Generates a marker signal at each sequence start.The [:SOURcehw]:BB:ESEQuencer:TRIGger[:SEQuencerst]:OUTPutch:DURation defines the length of the marker signal.

  • PULSe: Creates a marker signal with the same width as the pulse width.

  • PDW: Option:R&S SMW-K502: uses the marker signals as defined in the R&S Pulse Sequencer.Option:R&S SMW-K503: creates marker signals according to the marker bit field inside the PDW header.

  • READy: Option:R&S SMW-K506: creates marker signals according to the marker bit field inside the ADW header for acknowledgment.Required:[:SOURcehw]:BB:ESEQuencer:MODE ASEQuencing[:SOURcehw]:BB:ESEQuencer:ASEQuencing:OMODe DETerministicThis parameter is set per default.

  • ADW: Option:R&S SMW-K506: creates marker signals according to the marker bit field inside the ADW header.Required:[:SOURcehw]:BB:ESEQuencer:MODE ASEQuencing[:SOURcehw]:BB:ESEQuencer:ASEQuencing:OMODe INSTant

  • LINDex: Option: R&S SMW-K503/-K504Requires [:SOURcehw]:BB:ESEQuencer:MODE RTCI, [:SOURcehw]:LIST:MODE INDex, [:SOURcehw]:LIST:TRIGger:SOURce EXTernal and [:SOURcehw]:LIST:RMODe LEARned.Creates a marker signal according to the list index in the pulse descriptor word.

  • ODW: Option: R&S SMW-K573Creates marker signals according to the marker bit field inside the ODW header.

sequencer Repeated capability selector

output Repeated capability selector

When you do not use any explicit repeated capability selector, the value is taken from its parent group.