Source:Bb:Esequencer#
SCPI Commands
- [SOURce<HW>]:BB:ESEQuencer:ERRor
- [SOURce<HW>]:BB:ESEQuencer:MODE
- [SOURce<HW>]:BB:ESEQuencer:PRESet
- [SOURce<HW>]:BB:ESEQuencer:SEQCount
- [SOURce<HW>]:BB:ESEQuencer:STATe
- [SOURce<HW>]:BB:ESEQuencer:STRCount
Cloning the Group
// Create a clone of the original group, that exists independently
var esequencer2 = driver.Source.Bb.Esequencer.Clone();
Direct SCPI Members
- string Error#
// SCPI: [SOURce<HW>]:BB:ESEQuencer:ERRor string value = driver.Source.Bb.Esequencer.Error;Queries detected xml format errors.
error: string
- ExtSeqModeEnum Mode#
// SCPI: [SOURce<HW>]:BB:ESEQuencer:MODE ExtSeqModeEnum value = driver.Source.Bb.Esequencer.Mode; driver.Source.Bb.Esequencer.Mode = ExtSeqModeEnum.ASEQuencing;Selects the processing mode for the extended sequencer.
mode: USER | PSEQuencer | DFINding | RTCI | ASEQuencing | PLAYback | ESTReaming
USER: Processes user defined extended sequences.
PSEQuencer: Processes files created with the signal generation software R&S Pulse Sequencer.
DFINding: Processes files containing sequences with extended direction finding of the antennas. The files are created with the signal generation software R&S Pulse Sequencer.
RTCI: Processes files containing sequences of precalculated waveform.
ASEQuencing: Processes prestored ARB segments.
PLAYback: Processes user written PDW files.
ESTReaming: Processes I/Q data streams from an external source, which can be modified via ODW.
- void Preset ( )#
- void PresetAndWait ( )#
- void PresetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:BB:ESEQuencer:PRESet driver.Source.Bb.Esequencer.Preset(); driver.Source.Bb.Esequencer.PresetAndWait(); driver.Source.Bb.Esequencer.PresetAndWait(1000);Sets all the parameters of the extended sequencer to their default values (*RST values specified for the commands) . Not affected is the state set with the command method RsSmw.Source.Bb.Esequencer.State.
PresetAndWait is the same as Preset, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value
RsSmw.Utilities.OpcTimeout.
- int SeqCount#
// SCPI: [SOURce<HW>]:BB:ESEQuencer:SEQCount int value = driver.Source.Bb.Esequencer.SeqCount;Queries the number of sequencers.
numbOfSequencer: Number of available sequencers depends on the installed options.
- bool State#
// SCPI: [SOURce<HW>]:BB:ESEQuencer:STATe bool value = driver.Source.Bb.Esequencer.State; driver.Source.Bb.Esequencer.State = false;Activates signal generation, and deactivates all digital standards, digital modulation modes and other sweeps in the corresponding path.
state: 1 | ON | 0| OFF
- int StrCount#
// SCPI: [SOURce<HW>]:BB:ESEQuencer:STRCount int value = driver.Source.Bb.Esequencer.StrCount; driver.Source.Bb.Esequencer.StrCount = 1;Queries the number of streams.
numbOfStreams: integer
Subgroups
- Source:Bb:Esequencer:Archive
- Source:Bb:Esequencer:Asequencing
- Source:Bb:Esequencer:Clock
- Source:Bb:Esequencer:Dfinding
- Source:Bb:Esequencer:Estreaming
- Source:Bb:Esequencer:Playback
- Source:Bb:Esequencer:Pramp
- Source:Bb:Esequencer:Psequencer
- Source:Bb:Esequencer:Rtci
- Source:Bb:Esequencer:Sequencer<SequencerRepCap>
- Source:Bb:Esequencer:Setting
- Source:Bb:Esequencer:Stream<TwoStreamsRepCap>
- Source:Bb:Esequencer:Trigger
- Source:Bb:Esequencer:User