Source:Bb:Esequencer:Trigger#

SCPI Commands

[SOURce<HW>]:BB:ESEQuencer:TRIGger:RMODe
[SOURce<HW>]:BB:ESEQuencer:TRIGger:SOURce
[SOURce<HW>]:BB:ESEQuencer:[TRIGger]:SEQuence

Cloning the Group

// Create a clone of the original group, that exists independently
var trigger2 = driver.Source.Bb.Esequencer.Trigger.Clone();

Direct SCPI Members

TrigRunModeEnum Rmode#
// SCPI: [SOURce<HW>]:BB:ESEQuencer:TRIGger:RMODe
TrigRunModeEnum value = driver.Source.Bb.Esequencer.Trigger.Rmode;

Queries the signal generation status.

runningMode: STOP | RUN


TrigSourEnum Source#
// SCPI: [SOURce<HW>]:BB:ESEQuencer:TRIGger:SOURce
TrigSourEnum value = driver.Source.Bb.Esequencer.Trigger.Source;
driver.Source.Bb.Esequencer.Trigger.Source = TrigSourEnum.BBSY;

Selects the trigger signal source and determines the way the triggering is executed. Provided are the following trigger sources:

  • INTernal: Internal manual triggering of the instrument

  • INTA | INTB: Internal triggering by a signal from the other basebands

  • External trigger signal via one of the local or global connectors:

    • EGT1 | EGT2: External global trigger

    • EGC1 | EGC2: External global clock

    • ELTRigger: External local trigger

    • ELCLock: External local clock

  • For secondary instruments (SCONfiguration:MULTiinstrument:MODE SEC) , triggering via the external baseband synchronization signal of the primary instrument: SOURce1:BB:ARB:TRIGger:SOURce BBSY

  • OBASeband | BEXTernal | EXTernal: Setting only Provided only for backward compatibility with other Rohde & Schwarz signal generators. The R&S SMW200A accepts these values and maps them automatically as follows: EXTernal = EGT1, BEXTernal = EGT2, OBASeband = INTA or INTB (depending on the current baseband)

source: INTB | INTernal | OBASeband | EGT1 | EGT2 | EGC1 | EGC2 | ELTRigger | INTA | ELCLock | BEXTernal | EXTernal | BBSY | EGT3 | EGT4


DmTrigModeEnum Sequence#
// SCPI: [SOURce<HW>]:BB:ESEQuencer:[TRIGger]:SEQuence
DmTrigModeEnum value = driver.Source.Bb.Esequencer.Trigger.Sequence;
driver.Source.Bb.Esequencer.Trigger.Sequence = DmTrigModeEnum.AAUTo;

Selects the trigger mode:

  • AUTO = auto

  • RETRigger = retrigger

  • AAUTo = armed auto

  • ARETrigger = armed retrigger

  • SINGle = single

sequence: For method RsSmw.Source.Bb.Esequencer.Mode() USER | PSEQuencer | DFINding: AUTO | RETRigger | AAUTo | ARETrigger | SINGle For method RsSmw.Source.Bb.Esequencer.Mode() RTCI: AUTO | AAUTo


Subgroups