Source:Bb:Dm#

SCPI Commands

[SOURce<HW>]:BB:DM:CODing
[SOURce<HW>]:BB:DM:FORMat
[SOURce<HW>]:BB:DM:MDELay
[SOURce<HW>]:BB:DM:PRESet
[SOURce<HW>]:BB:DM:SLENgth
[SOURce<HW>]:BB:DM:SOURce
[SOURce<HW>]:BB:DM:SRATe
[SOURce<HW>]:BB:DM:STATe

Cloning the Group

// Create a clone of the original group, that exists independently
var dm2 = driver.Source.Bb.Dm.Clone();

Direct SCPI Members

DmCodEnum Coding#
// SCPI: [SOURce<HW>]:BB:DM:CODing
DmCodEnum value = driver.Source.Bb.Dm.Coding;
driver.Source.Bb.Dm.Coding = DmCodEnum.APCO25;

Selects the modulation coding.

coding: OFF | DIFF | DPHS | DGRay | GRAY | GSM | NADC | PDC | PHS | TETRa | APCO25 | PWT | TFTS | INMarsat | VDL | EDGE | APCO25FSK | ICO | CDMA2000 | WCDMA | APCO258PSK

  • OFF: The coding is automatically disabled if the selected modulation type is not possible with the coding that has been set.

  • DPHS: Phase Difference

  • DGRay: Difference + Gray


BbDmModTypeEnum Format#
// SCPI: [SOURce<HW>]:BB:DM:FORMat
BbDmModTypeEnum value = driver.Source.Bb.Dm.Format;
driver.Source.Bb.Dm.Format = BbDmModTypeEnum.APSK16;

Sets the modulation type. When a standard is selected (method RsSmw.Source.Bb.Dm.Standard.Value) , the modulation type is set to the default value.

format: ASK | BPSK | P2DBpsk | QPSK | QPSK45 | OQPSk | P4QPsk | P4DQpsk | PSK8 | P8D8psk | P8EDge | QAM16 | QAM32 | QAM64 | QAM256 | QAM1024 | MSK | FSK2 | FSK4 | USER | FSKVar | QAM128 | QEDGe | QAM16EDge | QAM32EDge | AQPSk | QAM4096 | APSK16 | APSK32 | FSK32 | FSK64 | FSK8 | FSK16 | QAM512 | QAM2048


double Mdelay#
// SCPI: [SOURce<HW>]:BB:DM:MDELay
double value = driver.Source.Bb.Dm.Mdelay;

No help available.


void Preset ( )#
void PresetAndWait ( )#
void PresetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:BB:DM:PRESet
driver.Source.Bb.Dm.Preset();
driver.Source.Bb.Dm.PresetAndWait();
driver.Source.Bb.Dm.PresetAndWait(1000);

Sets the default settings for digital modulation (*RST values specified for the commands) . Not affected is the state set with the following command: SOURce<hw>:BB:DM:STATe

PresetAndWait is the same as Preset, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value RsSmw.Utilities.OpcTimeout.


int Slength#
// SCPI: [SOURce<HW>]:BB:DM:SLENgth
int value = driver.Source.Bb.Dm.Slength;
driver.Source.Bb.Dm.Slength = 1;

Sets the sequence length of the waveform signal in symbols. The maximum number of symbols depends on the ARB memory and its installed option. The R&S SMW200A creates an ARB file with this length. The length equals the input sequence in symbols. It is not the length of the I/Q sequence after an upsampling. The product of the “Sequence Length” * “Oversampling” is limited by the maximum number of samples of the selected ARB.

slength: integer


DmDataSourWenum Source#
// SCPI: [SOURce<HW>]:BB:DM:SOURce
DmDataSourWenum value = driver.Source.Bb.Dm.Source;
driver.Source.Bb.Dm.Source = DmDataSourWenum.DLISt;

Selects the data source.

source: A sequence of 0 or 1, a pseudo-random sequence with different length, a pattern, a data list, or external serial data.


double SymbolRate#
// SCPI: [SOURce<HW>]:BB:DM:SRATe
double value = driver.Source.Bb.Dm.SymbolRate;
driver.Source.Bb.Dm.SymbolRate = 1.0;

Sets the symbol rate in Hz/kHz/MHz or sym/s, ksym/s and Msym/s.

srate: float


bool State#
// SCPI: [SOURce<HW>]:BB:DM:STATe
bool value = driver.Source.Bb.Dm.State;
driver.Source.Bb.Dm.State = false;

Enables digital modulation. Switching on digital modulation turns off all the other digital standards in the same signal path.

state: 1 | ON | 0| OFF


Subgroups