Source:Bb:Dm:Clist#

SCPI Commands

[SOURce<HW>]:BB:DM:CLISt:CATalog
[SOURce<HW>]:BB:DM:CLISt:COPY
[SOURce<HW>]:BB:DM:CLISt:DATA
[SOURce<HW>]:BB:DM:CLISt:DELete
[SOURce<HW>]:BB:DM:CLISt:FREE
[SOURce<HW>]:BB:DM:CLISt:POINts
[SOURce<HW>]:BB:DM:CLISt:SELect
[SOURce<HW>]:BB:DM:CLISt:TAG

Direct SCPI Members

List<string>Catalog#
// SCPI: [SOURce<HW>]:BB:DM:CLISt:CATalog
List<string> value = driver.Source.Bb.Dm.Clist.Catalog;

Reads out the list of files present in the default directory. List type / Command / File extension

  • Data list / …:DLISt… / dm_iqd

  • Control list / …:CLISt… / dm_iqc

  • User filter files / …:FLISt… / vaf

  • User mapping lists / …:MLISt… / vam

See also “Handling files in the default or in a specified directory”.

catalog: Returns a string of filenames separated by commas.


void Copy ( string filename )#
// SCPI: [SOURce<HW>]:BB:DM:CLISt:COPY
driver.Source.Bb.Dm.Clist.Copy("abc");

Copies the selected data list (dm_iqd) / control list (dm_iqc) as a new list with name specified by <Filename>. If a list with the specified name exists, it is overwritten. If it does not yet exist, it is created. The source file has to be available in the default directory. See also “Handling files in the default or in a specified directory”.

filename string


string Data#
// SCPI: [SOURce<HW>]:BB:DM:CLISt:DATA

driver.Source.Bb.Dm.Clist.Data = "abc";

Sends the data to the currently selected control list. If the list already contains data, it is overwritten. This command only writes data into the data section of the file. The values for the control signals are sent, arranged in an 8-bit value as defined in Table “Contents of a control lists”. Signal / Order / Decimal value of bits

  • Marker 1 Marker 2 Marker 3 / LSB / 1 2 4

  • Burst / LSB / 16

  • LevAtt1 / LSB / 32

  • CWMod / LSB / 64

  • Hop / MSB / 128

The data can also be sent as a binary block. Each binary block is a 2-byte value, in which the 16 bits represent the binary values (16-bit unsigned integer, 2 bytes, LSB first) . When binary data transmission is in use, use the command SYSTem:COMMunicate:GPIB:LTERminator EOI to set the termination character mode to ‘EOI control data message only’ so that a random LF in the data sequence is not interpreted as End, thereby prematurely terminating the data transmission. The command …LTER STAN resets the mode. According to the specifications, the byte sequence is defined as ‘most significant byte first’. Tip: Control lists are created in binary format. Use an ASCII format to create a waveform file with R&S WinIQSIM2. See also “Creating control lists with tag file format”. The command *RST has no effect on data lists.

Data: string


void Delete ( string filename )#
// SCPI: [SOURce<HW>]:BB:DM:CLISt:DELete
driver.Source.Bb.Dm.Clist.Delete("abc");

Deletes the specified list from the default directory or from the directory specified with the complete file path. See also “Handling files in the default or in a specified directory”. List type / Command / File extension

  • Data list / …:DLISt… / dm_iqd

  • Control list / …:CLISt… / dm_iqc

  • User standard / …:ULISt… / dm_stu

  • User filter files / …:FLISt… / vaf

  • User mapping lists / …:MLISt… / vam

filename string


int Free#
// SCPI: [SOURce<HW>]:BB:DM:CLISt:FREE
int value = driver.Source.Bb.Dm.Clist.Free;

Queries the list free memory. List type / Command / File extension

  • Data list / …:DLISt… / dm_iqd

  • Control list / …:CLISt… / dm_iqc

  • User filter files / …:FLISt… / vaf

  • User mapping lists / …:MLISt… / vam

free: integer


int Points#
// SCPI: [SOURce<HW>]:BB:DM:CLISt:POINts
int value = driver.Source.Bb.Dm.Clist.Points;

Queries the number of lines (2 bytes) in the currently selected list.

points: integer


string Select#
// SCPI: [SOURce<HW>]:BB:DM:CLISt:SELect
string value = driver.Source.Bb.Dm.Clist.Select;
driver.Source.Bb.Dm.Clist.Select = "abc";

Selects the specified list file from the default directory or in the directory specified with the complete file path. See also method RsSmw.MassMemory.CurrentDirectory. If a list with the specified name does not yet exist, it is created. The file extension can be omitted. See also “Handling files in the default or in a specified directory”. List type / Command / File extension

  • Data list / …:DLISt… / dm_iqd

  • Control list / …:CLISt… / dm_iqc

  • User standard / …:ULISt… / dm_stu

  • User filter files / …:FLISt… / vaf

  • User mapping lists / …:MLISt… / vam


string Tag#
// SCPI: [SOURce<HW>]:BB:DM:CLISt:TAG
string value = driver.Source.Bb.Dm.Clist.Tag;

Queries the content of the specified tag in the selected file.

tag: For a description of the available tag formats, see “Tags for waveforms, data and control lists”.