Source:Bb:Dm:Pramp#
SCPI Commands
- [SOURce<HW>]:BB:DM:PRAMp:ATTenuation
- [SOURce<HW>]:BB:DM:PRAMp:FDELay
- [SOURce<HW>]:BB:DM:PRAMp:RDELay
- [SOURce<HW>]:BB:DM:PRAMp:SHAPe
- [SOURce<HW>]:BB:DM:PRAMp:SOURce
- [SOURce<HW>]:BB:DM:PRAMp:TIME
- [SOURce<HW>]:BB:DM:PRAMp:[STATe]
Cloning the Group
// Create a clone of the original group, that exists independently
var pramp2 = driver.Source.Bb.Dm.Pramp.Clone();
Direct SCPI Members
- double Attenuation#
// SCPI: [SOURce<HW>]:BB:DM:PRAMp:ATTenuation double value = driver.Source.Bb.Dm.Pramp.Attenuation; driver.Source.Bb.Dm.Pramp.Attenuation = 1.0;Sets the level attenuation for signal ranges that are flagged with the level attribute attenuated by the control signal.
attenuation: float
- double Fdelay#
// SCPI: [SOURce<HW>]:BB:DM:PRAMp:FDELay double value = driver.Source.Bb.Dm.Pramp.Fdelay; driver.Source.Bb.Dm.Pramp.Fdelay = 1.0;Sets the delay in the rising edge.
- double Rdelay#
// SCPI: [SOURce<HW>]:BB:DM:PRAMp:RDELay double value = driver.Source.Bb.Dm.Pramp.Rdelay; driver.Source.Bb.Dm.Pramp.Rdelay = 1.0;Sets the delay in the rising edge.
rdelay: float
- RampFuncEnum Shape#
// SCPI: [SOURce<HW>]:BB:DM:PRAMp:SHAPe RampFuncEnum value = driver.Source.Bb.Dm.Pramp.Shape; driver.Source.Bb.Dm.Pramp.Shape = RampFuncEnum.COSine;Sets the edge shape of the ramp envelope.
shape: LINear | COSine
- ClockSourceAenum Source#
// SCPI: [SOURce<HW>]:BB:DM:PRAMp:SOURce ClockSourceAenum value = driver.Source.Bb.Dm.Pramp.Source; driver.Source.Bb.Dm.Pramp.Source = ClockSourceAenum.INTernal;Sets the source for the power ramp control signals.
source: INTernal
- double Time#
// SCPI: [SOURce<HW>]:BB:DM:PRAMp:TIME double value = driver.Source.Bb.Dm.Pramp.Time; driver.Source.Bb.Dm.Pramp.Time = 1.0;Sets the power ramping rise time and fall time for a burst.
time: float
- bool State#
// SCPI: [SOURce<HW>]:BB:DM:PRAMp:[STATe] bool value = driver.Source.Bb.Dm.Pramp.State; driver.Source.Bb.Dm.Pramp.State = false;Enables power ramping.
state: 1 | ON | 0| OFF
Subgroups