Fptr

SCPI Command :

[SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:UL:BWP<BWP(DIR0)>:PUSCh:FPTR
class FptrCls[source]

Fptr commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(userNull=UserNull.Default, cellNull=CellNull.Default, bwPartNull=BwPartNull.Default) RsSmbv.enums.FullPwrTrans[source]
# SCPI: [SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:UL:BWP<BWP(DIR0)>:PUSCh:FPTR
value: enums.FullPwrTrans = driver.source.bb.nr5G.ubwp.user.cell.uplink.bwp.pusch.fptr.get(userNull = repcap.UserNull.Default, cellNull = repcap.CellNull.Default, bwPartNull = repcap.BwPartNull.Default)

Configures the higher layer parameter ul-FullPowerTransmission as defined in 3GPP 38.331.

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Bwp’)

return

full_power_trans: No help available

set(full_power_trans: RsSmbv.enums.FullPwrTrans, userNull=UserNull.Default, cellNull=CellNull.Default, bwPartNull=BwPartNull.Default) None[source]
# SCPI: [SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:UL:BWP<BWP(DIR0)>:PUSCh:FPTR
driver.source.bb.nr5G.ubwp.user.cell.uplink.bwp.pusch.fptr.set(full_power_trans = enums.FullPwrTrans.FP, userNull = repcap.UserNull.Default, cellNull = repcap.CellNull.Default, bwPartNull = repcap.BwPartNull.Default)

Configures the higher layer parameter ul-FullPowerTransmission as defined in 3GPP 38.331.

param full_power_trans

FP| FPM1| FPM2| NCON NCON Not configured. FP|FPM1|FPM2 Full power mode type.

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Bwp’)