Sid1

SCPI Command :

[SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:UL:BWP<BWP(DIR0)>:PUSCh:DMTB:SID1
class Sid1Cls[source]

Sid1 commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(userNull=UserNull.Default, cellNull=CellNull.Default, bwPartNull=BwPartNull.Default) int[source]
# SCPI: [SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:UL:BWP<BWP(DIR0)>:PUSCh:DMTB:SID1
value: int = driver.source.bb.nr5G.ubwp.user.cell.uplink.bwp.pusch.dmtb.sid1.get(userNull = repcap.UserNull.Default, cellNull = repcap.CellNull.Default, bwPartNull = repcap.BwPartNull.Default)

Limits the number of code block groups per transport block. In 5G NR a huge TB (transport block) is split into multiple code blocks (CB) . Multiples CBs are grouped into one code block group (CBG) . The number of code blocks grouped into the CBG can be limited by the ‘Max Code Block Groups Per Transport Block’ setting.

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Bwp’)

return

scram_id_1: No help available

set(scram_id_1: int, userNull=UserNull.Default, cellNull=CellNull.Default, bwPartNull=BwPartNull.Default) None[source]
# SCPI: [SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:UL:BWP<BWP(DIR0)>:PUSCh:DMTB:SID1
driver.source.bb.nr5G.ubwp.user.cell.uplink.bwp.pusch.dmtb.sid1.set(scram_id_1 = 1, userNull = repcap.UserNull.Default, cellNull = repcap.CellNull.Default, bwPartNull = repcap.BwPartNull.Default)

Limits the number of code block groups per transport block. In 5G NR a huge TB (transport block) is split into multiple code blocks (CB) . Multiples CBs are grouped into one code block group (CBG) . The number of code blocks grouped into the CBG can be limited by the ‘Max Code Block Groups Per Transport Block’ setting.

param scram_id_1

G2| G4| DISabled| G6| G8 G2 Limits the number of code block groups per transport block to 2. G4 Limits the number of code block groups per transport block to 4. DISabled Default value, which disabled the limitation of code block groups per transport block. G6 Limits the number of code block groups per transport block to 6. G8 Limits the number of code block groups per transport block to 8.

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Bwp’)