VpInter

SCPI Command :

[SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:DL:BWP<BWP(DIR0)>:PDSCh:VPINter

class VpInterCls[source]

VpInter commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(userNull=UserNull.Default, cellNull=CellNull.Default, bwPartNull=BwPartNull.Default) → RsSmbv.enums.VrbToPrbInterleaverAll[source]

# SCPI: [SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:DL:BWP<BWP(DIR0)>:PDSCh:VPINter
value: enums.VrbToPrbInterleaverAll = driver.source.bb.nr5G.ubwp.user.cell.downlink.bwp.pdsch.vpInter.get(userNull = repcap.UserNull.Default, cellNull = repcap.CellNull.Default, bwPartNull = repcap.BwPartNull.Default)

Queries the mapping method used for the mapping of the virtual resource blocks (VRB) to the physical resource blocks (PRB) .

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Bwp’)

return

vrb_to_prb_interle: VPN| VP2| VP4 VPN Non-interleaved VP2|VP4 Interleaving is enabled. The value defines the interleaving unit size: VP2 = 2 and VP4 = 4.

set(vrb_to_prb_interle: RsSmbv.enums.VrbToPrbInterleaverAll, userNull=UserNull.Default, cellNull=CellNull.Default, bwPartNull=BwPartNull.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:DL:BWP<BWP(DIR0)>:PDSCh:VPINter
driver.source.bb.nr5G.ubwp.user.cell.downlink.bwp.pdsch.vpInter.set(vrb_to_prb_interle = enums.VrbToPrbInterleaverAll.VP2, userNull = repcap.UserNull.Default, cellNull = repcap.CellNull.Default, bwPartNull = repcap.BwPartNull.Default)

Queries the mapping method used for the mapping of the virtual resource blocks (VRB) to the physical resource blocks (PRB) .

param vrb_to_prb_interle

VPN| VP2| VP4 VPN Non-interleaved VP2|VP4 Interleaving is enabled. The value defines the interleaving unit size: VP2 = 2 and VP4 = 4.

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Bwp’)