Pattern

SCPI Command :

[SOURce<HW>]:BB:EVDO:TERMinal<ST>:DCHannel:PACKet<CH>:DATA:PATTern
class PatternCls[source]

Pattern commands group definition. 1 total commands, 0 Subgroups, 1 group commands

class PatternStruct[source]

Response structure. Fields:

  • Pattern: List[str]: numeric

  • Bitcount: int: integer Range: 1 to 64

get(terminal=Terminal.Default, packet=Packet.Default) → PatternStruct[source]
# SCPI: [SOURce<HW>]:BB:EVDO:TERMinal<ST>:DCHannel:PACKet<CH>:DATA:PATTern
value: PatternStruct = driver.source.bb.evdo.terminal.dchannel.packet.data.pattern.get(terminal = repcap.Terminal.Default, packet = repcap.Packet.Default)

(enabled for an access terminal working in traffic mode) Selects the bit pattern for the data source. Note: Configuration of Packet 2 and Packet 3 transmitted on the second and the third subframe, is only enabled for physical layer subtype 2.

param terminal

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Terminal’)

param packet

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Packet’)

return

structure: for return value, see the help for PatternStruct structure arguments.

set(pattern: List[str], bitcount: int, terminal=Terminal.Default, packet=Packet.Default) → None[source]
# SCPI: [SOURce<HW>]:BB:EVDO:TERMinal<ST>:DCHannel:PACKet<CH>:DATA:PATTern
driver.source.bb.evdo.terminal.dchannel.packet.data.pattern.set(pattern = ['rawAbc1', 'rawAbc2', 'rawAbc3'], bitcount = 1, terminal = repcap.Terminal.Default, packet = repcap.Packet.Default)

(enabled for an access terminal working in traffic mode) Selects the bit pattern for the data source. Note: Configuration of Packet 2 and Packet 3 transmitted on the second and the third subframe, is only enabled for physical layer subtype 2.

param pattern

numeric

param bitcount

integer Range: 1 to 64

param terminal

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Terminal’)

param packet

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Packet’)