Drate

SCPI Command :

[SOURce<HW>]:BB:EVDO:TERMinal<ST>:DCHannel:PACKet<CH>:DRATe

class DrateCls[source]

Drate commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(terminal=Terminal.Default, packet=Packet.Default) → float[source]

# SCPI: [SOURce<HW>]:BB:EVDO:TERMinal<ST>:DCHannel:PACKet<CH>:DRATe
value: float = driver.source.bb.evdo.terminal.dchannel.packet.drate.get(terminal = repcap.Terminal.Default, packet = repcap.Packet.Default)

(enabled for an access terminal working in traffic mode) Displays the data rate in kbps of the selected packet. Note: Configuration of Packet 2 and Packet 3 transmitted on the second and the third subframe, is only enabled for physical layer subtype 2.

param terminal

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Terminal’)

param packet

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Packet’)

return

drate: float Range: 0 to …