Data

SCPI Command :

[SOURce<HW>]:BB:EVDO:TERMinal<ST>:DCHannel:PACKet<CH>:DATA

class DataCls[source]

Data commands group definition. 3 total commands, 2 Subgroups, 1 group commands

get(terminal=Terminal.Default, packet=Packet.Default) → RsSmbv.enums.DataSourceA[source]

# SCPI: [SOURce<HW>]:BB:EVDO:TERMinal<ST>:DCHannel:PACKet<CH>:DATA
value: enums.DataSourceA = driver.source.bb.evdo.terminal.dchannel.packet.data.get(terminal = repcap.Terminal.Default, packet = repcap.Packet.Default)

Selects the data source of an access terminal working in traffic mode

param terminal

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Terminal’)

param packet

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Packet’)

return

data: ZERO| ONE| PATTern| PN9| PN11| PN15| PN16| PN20| PN21| PN23| DLISt

set(data: RsSmbv.enums.DataSourceA, terminal=Terminal.Default, packet=Packet.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:EVDO:TERMinal<ST>:DCHannel:PACKet<CH>:DATA
driver.source.bb.evdo.terminal.dchannel.packet.data.set(data = enums.DataSourceA.DLISt, terminal = repcap.Terminal.Default, packet = repcap.Packet.Default)

Selects the data source of an access terminal working in traffic mode

param data

ZERO| ONE| PATTern| PN9| PN11| PN15| PN16| PN20| PN21| PN23| DLISt

param terminal

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Terminal’)

param packet

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Packet’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.evdo.terminal.dchannel.packet.data.clone()

Subgroups