Upper

SCPI Command :

[SENSe]:POWer:ACHannel:SPACing:GAP<gap>:MANual:UPPer

class UpperCls

Upper commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(sb_gaps: RsFsw.enums.SubBlockGaps, gapChannel=GapChannel.Default) → float

# SCPI: [SENSe]:POWer:ACHannel:SPACing:GAP<gap>:MANual:UPPer
value: float = driver.sense.power.achannel.spacing.gap.manual.upper.get(sb_gaps = enums.SubBlockGaps.AB, gapChannel = repcap.GapChannel.Default)

Defines the distance from the sub block to the specified upper gap channel. The required spacing can be determined according to the following formula: Spacing = [right sub block CF] - [CF of gap channel] - ([RF bandwidth of right sub block] /2) Is only available for for asymmetrical (manual) configuration of gap channels (see [SENSe:]POWer:ACHannel:GAP<gap>:MODE) .

param sb_gaps

AB | BC | CD | DE | EF | FG | GH Name of the gap, defined by the letters of the surrounding sub blocks (e.g. ‘AB’ for the gap between sub blocks A and B) .

param gapChannel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Gap’)

return

spacing: Unit: HZ

set(sb_gaps: RsFsw.enums.SubBlockGaps, spacing: float, gapChannel=GapChannel.Default) → None

# SCPI: [SENSe]:POWer:ACHannel:SPACing:GAP<gap>:MANual:UPPer
driver.sense.power.achannel.spacing.gap.manual.upper.set(sb_gaps = enums.SubBlockGaps.AB, spacing = 1.0, gapChannel = repcap.GapChannel.Default)

Defines the distance from the sub block to the specified upper gap channel. The required spacing can be determined according to the following formula: Spacing = [right sub block CF] - [CF of gap channel] - ([RF bandwidth of right sub block] /2) Is only available for for asymmetrical (manual) configuration of gap channels (see [SENSe:]POWer:ACHannel:GAP<gap>:MODE) .

param sb_gaps

AB | BC | CD | DE | EF | FG | GH Name of the gap, defined by the letters of the surrounding sub blocks (e.g. ‘AB’ for the gap between sub blocks A and B) .

param spacing

Unit: HZ

param gapChannel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Gap’)