PresetRefLevel

SCPI Command :

[SENSe]:POWer:ACHannel:PRESet:RLEVel

Commands in total: 1
Subgroups: 0
Direct child commands: 1

set(opc_timeout_ms: int = -1) → None[source]

# [SENSe]:POWer:ACHannel:PRESet:RLEVel
driver.sense.power.achannel.presetRefLevel.set()

This command determines the ideal reference level for the current measurement. This automatic routine makes sure that the signal power level does not overload the FSW or restrict the dynamic range by an insufficient S/N ratio. To determine the best reference level, the FSW aborts current measurements and performs a series of test sweeps. After it has finished the test, it continues with the actual measurement.

Parameters:: opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.